Description
WATTS® Temperature/Pressure Relief Valve, Automatic Reseating, Series: 340, 2 x 1-1/2 in Nominal, MNPT x FNPT End Style, 150 psi Pressure, 210 deg F, Bronze Body, 4-1/2 in W x 9-3/4 in H Dimensions, Domestic/Import: Domestic
Features:
- Non mechanical seat to disc alignment
- Thermostat is accurate and proven exclusively designed and manufactured by WATTS®
- Tamper resistant bonnet screws
- Series 40 and 140 feature a unique thermostat with a special thermo-bonded coating
- Series 140 sizes 1 in (25 mm) and above are standardly furnished with stainless steel thermostat tube
- Series N240, 340 and 342 are furnished with stainless steel thermostat
- 75, 100, 125 and 150 psi standard setting
- The discharge line must be the same size as the valve outlet and must pitch downward from the valve and terminate at least 6 in (152 mm) above the floor drain where any discharge will be clearly visible
- Inquire with governing authorities for local installation requirements
- A relief valve functions in an emergency by discharging water, therefore, it is essential that a discharge line be piped from the valve in order to carry the overflow to a safe place of disposal
- For 100DT discharge line consult your WATTS® agent
- This device is designed for emergency safety relief and shall not be used as an operating control
Applications:
Commercial Water Heater
Standards/Approval:
- ANSI Z21.22
- ANSI Z21.22
- ASME Specified
- CSA Cqertified
- MIL-V-136-12D
- National Board of B and PVI to Section IV
- PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Warranty:
Limited
