Description

WATTS® Ball Valve, 3-Piece, Series: LFB6801, 3/4 in Nominal, Solder End Style, 600 psi WOG/150 psi WSP Pressure, 0 to 450 deg F, 30 gpm Flow Rate, Full Port, Media: Water, 3/4 in Orifice, Latch Lock Handle Actuator, 316 Stainless Steel Ball, 3-1/4 in Inlet to Outlet Length, 2-1/4 in Top to Inlet Center, Brass Body, 316 Stainless Steel/Carbon/Glass Reinforced PTFE Durafill® Trim, Glass Reinforced PTFE Softgoods, Domestic

Features:

• Lead free construction
• Solder end connections
• Latch-Lok handle only
• Lift-out design
• Blowout proof, pressure retaining stem
• Standard actuator mounting pads
• Vinyl insulator on heavy duty zinc plated carbon steel handles
• Each valve factory tested
• 304 stainless steel latch-lock handle
• PTFE seals/glass reinforced PTFE stem packing gland
• The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
• 316 stainless steel stem shaft/carbon/glass reinforced PTFE Durafill seat

Applications:

For Commercial and Industrial Applications

Standards/Approval:

• BAA/ARRA Compliant
• MSS-SP-110
• PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Warranty:

Limited

Actuator Type	Latch Lock Handle
Ball Material	316 Stainless Steel
Body Material	Brass
Domestic/Import	Domestic
End Style	Solder
Flow Rate	30 gpm
Inlet to Outlet Length	3-1/4 in
Media	Water
Nominal Size	3/4 in
Orifice Size	3/4 in
Port Type	Full
Pressure Rating	600 psi WOG/150 psi WSP
Series	LFB6801
Softgoods Material	Glass Reinforced PTFE
Temperature Rating	0 to 450 deg F
Top to Inlet Center	2-1/4 in
Trim Material	316 Stainless Steel/Carbon/Glass Reinforced PTFE Durafill®
Manufacturer	Watts Regulator Company