Description
WATTS® Pressure Reducing Valve, Standard Capacity, Series: LF25AUB-Z3, 1-1/4 in Nominal, Double Union FNPT, 300 psi, 160 deg F, Media: Water, 10-3/4 in Inlet to Outlet Length, Copper Silicon Alloy Body, EPDM Disc/Stainless Steel Seat Trim, EPDM, 3-5/8 in D x 9 in H, Domestic
Features:
- Double unions, gauge tapping and plug
- Bypass feature controls thermal expansion pressure
- Standard construction includes Z3 sealed spring cage and stainless steel corrosion resistant adjusting and cage screws for accessible outdoor or pit installations
- Integral stainless steel strainer removable for cleaning
- Replaceable seat module
- Gauge port tapping allows downstream pressure measurements
- EPDM diaphragm
- The bypass feature will not prevent the pressure relief valve from opening on the hot water supply system with pressure above 150 psi
- A water saving test program concluded that reducing the supply pressure from 80 to 50 psi (551 to 345 kPa) resulted in a water savings of 30%
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
- 25 to 75 psi adjustable reduced pressure
Applications:
Commercial and Residential
Standards/Approval:
- ASSE 1003
- ANSI A112.26.2
- CSA B356
- IAPMO Listed
- MIL-V-18146B Type I
- NSF/ANSI 61-G
- UPC Listed
- PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
Limited