Description
TPI Unit Heater, 3-Phase Fan Forced Standard, Series: 5100, 68.3 Btu/hr, 480 VAC, 24.1 A, 50/60 Hz, 20 kW, 1100 cfm, 57 deg F, Wall Mount, 12 ft Horizontal/18 ft Vertical Mounting Height, Steel, Powder Coated, 21-1/2 in W x 6-1/2 in D x 28-11/16 in H
Features:
- Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
- Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
- All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
- All motors mounted with rubber insulators to minimize vibration and noise
- Fan over-ride purges unit of residual heat at shutdown
- Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
- Unit heaters can be mounted for horizontal or vertical discharge
Applications:
Indoor-Commercial and Industrial Applications
Standards/Approval:
- ARRA Compliant
- Buy American Act Compliant
- cETLus Listed
- ABS Approved
- PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov
Warranty:
1 Year Limited
