Description
TPI Unit Heater, 3-Phase Standard, Series: 2600, 480 VAC, 24.08 A, 20 kW, 1200 cfm, 1570 rpm, 52 deg F, Panel/Downflow Mount, 6 ft Mounting Height, Steel, Gray, Epoxy Powder Coated, 20-1/2 in W x 20-1/2 in D x 15 in H
Features:
- 16 ga steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door
- Corrosion resistant element with steel sheath and steel spiral fins
- All units come equipped with manual reset limit controls to de-energize the heater should an over temperature situation occur
- Totally enclosed, 1-Speed, 1-phase permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
- 1570 rpm max axial flow fan blade
- All models equipped with fan purge which allows fan to operate after elements are de-energized to purge residual heat
- Equipped with in-built disconnect switch
- Unit can be mounted using optional mounting bracket or field constructed angle iron bracket
- Not recommended for mounting with threaded rod or chain
- Elements shall consist of nickel-chromium alloy resistance wire embedded and completely surrounded in magnesium oxide, enclosed and swaged into corrosion resistant sheath
- Heaters shall be designed for a single supply circuit with elements, motor and control circuits subdivided and fused to conform with the latest National electric Code and OSHA requirements
- All 3-phase heaters shall have balanced phases
- Overheat protection
Applications:
Indoor-Commercial, Industrial-Downflow and High Bay Areas
Standards/Approval:
- ARRA Compliant
- Buy American Act Compliant
- cETLus Listed
- OSHA Compliant
- PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer
- and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov
Warranty:
1 Year Limited
