KSCdirect

Product Data

KSCdirect Part #: TPI K3472A1
Description: 2000W 240V 3 Phase Commerical Surface Mounted Ceiling Htr 03983802
MFG Part #: K3472A1
UPC: 686334398381
Supplier: TPI Corporation
Usually ships in 12 days.
You will be notified of any delay and may cancel at that time.

Your Price: $1513.60 / EA

QTY:  
For shipping rates, add item to cart.
* Quantity discounts may be available. Call Kelly Supply at 800-918-8939.
Alternatively, you may e-mail info@kscdirect.com for service.

Details

Description

TPI Ceiling Heater, 3-Phase Fan Forced Standard, Series: 3470, 6826 Btu/hr, 240 VAC, 4.8 A, 2 kW, 425 cfm, 1300 rpm, 15 deg F, Ceiling/Surface Mount, 12 ft Mounting Height, Steel, White, Powder Coated, 16-3/4 in W x 8-9/16 in D x 16-3/4 in H

Features:

  • The heater shall be so designed to provide an even distribution of heated air to the space to be heated by drawing return air in the periphery of the heater, across and through the element and be discharged from the center section of the heater by means of an electric motor and axial flow fan blade
  • Motor shall be permanent lubricated, unit bearing, totally enclosed shaded pole type with impedance protection
  • Motors shall operate at no more than 1300 rpm and shall be same voltage as the heater
  • Heaters shall have a rating of 600 cfm at 1000 fpm with a maximum temperature rise of 44 deg F and 63.9 DB RE 10^12 W
  • Element assemblies shall consist of two or three corrosion resistant steel sheathed type elements mechanically bonded to common corrosion resistant steel fins
  • Each sheathed element shall consist of helically coiled nickel-chromium alloy resistant wire completely embedded in and surrounded by magnesium oxide, enclosed and wedged into corrosion resistant steel sheaths
  • Elements shall have 2 in cold conductor pins extending into sheath and shall have a density of no more than 60 W/in
  • Heaters shall be equipped with a "manual reset" thermal overload which disconnects elements and motor in the event normal operating temperatures are exceeded
  • For safety, if opened due to abnormal temperature, thermal overload shall remain open until manually reset
  • Automatic reset thermal overloads which allow the element to continue to cycle under abnormal conditions will not be accepted
  • Throw designed for 8 to 12 ft ceilings
  • UT1001 low voltage recommended remote thermostats

Applications:

Indoor-Commercial and Industrial Applications

Standards/Approval:

  • ARRA Compliant
  • Buy American Act Compliant
  • cETLus Listed
  • PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer
  • and chromium
  • which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov

Warranty:

1 Year Limited

Attributes/Specifications

Amperage Rating 4.8 A
Capacity 6826 Btu/hr
Color White
Dimensions 16-3/4 in W x 8-9/16 in D x 16-3/4 in H
Finish Powder Coated
Flow Rate 425 cfm
Material Steel
Mounting Height 12 ft
Mounting Type Ceiling/Surface
Power Rating 2 kW
Series 3470
Speed 1300 rpm
Temperature Rating 15 deg F
Type 3-Phase Fan Forced Standard
Voltage Rating 240 VAC
Manufacturer TPI Corporation