Description
TPI Hot Room Heater, 1-Phase, Series: HR Series, 240 VAC, 36 A, 8.1 kW, 1800 cfm, 36 in L x 22 in W x 18 in H, Domestic
Features:
- High temperature rated, ball bearing motor, forward curved centrifugal blower, standard with airflow switch, temperature limit controls (manual and automatic resets) and lockable disconnect switch with fuse block
- Galvannealed 20 ga heavy duty metal housing
- Totally enclosed, finned tubular stainless steel heating elements, provide the benefits of closer temperature regulation, less chance of shock hazards, less susceptibility for shorting, easy service and will better withstand physical abuse
- Capability of mounting for in-room use or mounting at an external wall/ceiling, with the heat inlet/outlet ducted to/from the room, 1 in duct flanges at inlet and discharge ends are standard, to provide for ducting on the unit
- All models listed are designed for permanent mounting and hard wiring
- A typical hot room should be totally enclosed, with provisions made to keep air from escaping, other than the air being ducted thru the heater itself when the unit is mounted outside the room, As always, insulation should be considered for walls and ceiling, to maximize energy efficiency and heater performance
Standards/Approval:
- ARRA Compliant
- Buy American Act Compliant
- PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov
