Description
TPI Unit Heater, 3-Phase Standard, Series: 2600, 208 VAC, 138.96 A, 50 kW, 3300 cfm, 1570 rpm, 48 deg F, Panel/Downflow Mount, 6 ft Mounting Height, Steel, Gray, Epoxy Powder Coated, 27 in W x 27 in D x 20-1/2 in H
Features:
- 16 ga steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door
- Corrosion resistant element with steel sheath and steel spiral fins
- All units come equipped with manual reset limit controls to de-energize the heater should an over temperature situation occur
- Totally enclosed, 2-speed, 1-phase permanently lubricated and thermally protected motors with sleeve bearings on 24 to 50 kW models
- 1570 rpm max axial flow fan blade
- All models equipped with fan purge which allows fan to operate after elements are de-energized to purge residual heat
- Unit can be mounted using optional mounting bracket or field constructed angle iron bracket
- Not recommended for mounting with threaded rod or chain
- Elements shall consist of nickel-chromium alloy resistance wire embedded and completely surrounded in magnesium oxide, enclosed and swaged into corrosion resistant sheath
- Heaters shall be designed for a single supply circuit with elements, motor and control circuits subdivided and fused to conform with the latest National electric Code and OSHA requirements
- All 3-phase heaters shall have balanced phases
- Overheat protection
Applications:
Indoor-Commercial and Industrial Applications
Standards/Approval:
- ARRA Compliant
- Buy American Act Compliant
- cETLus Listed
- OSHA Compliant
- PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov
Warranty:
1 Year Limited
