Description
TPI Electric Institutional Wall Convector, 1-Phase Standard, Series: 8800, 6826 Btu/hr, 120 VAC, 16.667 A, 2 kW, 40 to 110 deg F, Wall Mount, Steel, Ivory, Textured Powder Coated, 72 in L x 5 in W x 18 in H
Features:
- 11 ga perforated steel housing powder coated with textured ivory finish
- Tamper proof left side control panel houses built-in single pole thermostat range 40 to 110 deg F and disconnect switch, thermostat on 120 to 277 V units is line voltage and low voltage 24 V on 346 to 600 V units
- Linear limit type thermal overload with automatic reset
- Tamper proof fasteners
- Stainless steel element with aluminum fins
- Institutional enclosure 11 ga perforated steel with sloped top design
- Heavy duty end caps welded to the enclosure
- Control compartment for housing thermostat and disconnect switch is accessible by use of security type fastener
- The entire enclosure is protected by epoxy powder coated paint finish
- All steel high mass element construction with nickel-chromium resistance wire embedded in compacted efficient dielectric to ensure proper heat transfer
- Aluminum fins mechanically bonded to steel tube allows for increased surface area and even heat transfer
- Automatic reset hydraulic thermal overload covers full length of heating element and shuts down heater when safe operating temperatures are exceeded
Applications:
Indoor-Commercial, Industrial and Institutional Applications
Standards/Approval:
- cETLus Listed
- PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov
Warranty:
1 Year Limited
