Description
TPI Heater, 1-Phase Fan Forced, Series: 3310, 120 VAC, 8.3 A, 1 kW, 175 cfm, 600 rpm, 90 deg F, Wall Mount, Steel, White, Powder Coated, 14-3/16 in W x 4 in D x 19-15/16 in H
Features:
- Powder coated 18 ga steel front
- Automatic reset thermal limit for safety
- Steel block fin element
- Units with dual wattage, factory wired to highest wattage
- Wattage selectable at time of installation on some models
- Furnish and install electric forced air heaters where specified
- The heaters shall be constructed of a heavy gauge steel housing
- The heaters shall have a low speed 600 rpm motor which drives a vane axial blower to deliver a quiet 175 cfm of down flow air
- The heating element shall be of the sealed block fin type with large, parallel steel fins for quick heat transfer
- Unit shall have a standard thermal overload cutoff for added safety, a fan switch for fan only operation
- The in-built thermostat shall be calibrated to provide a range of 0 to 110 deg F
Applications:
Indoor, Commercial and Residential Applications
Standards/Approval:
- ARRA Compliant
- Buy American Act Compliant
- cETLus Listed
- PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov.
Warranty:
1 Year Limited
