Description
Titan® Silent Check Valve, Center Guided Globe, Series: Model CV50-DI-S, 6 in Nominal Size, Flat Face Flanged, 250 psi WOG, 150 lb, 100 deg F, 10-1/2 in Inlet to Outlet Length, Ductile Iron Body, 316 Stainless Steel Trim, Softgoods: Non-Asbestos Gasket, Epoxy Painted, 11-1/8 in Dia
Features:
- Designed for long service life - Newly designed CV50's have straightening vanes that reduce turbulence in incoming flow, thus minimizing noise, vibrations, erosion, cavitations and other factors that could result in premature valve failure
- Head loss is minimized by the integral straightening vanes that help create laminar flow
- A large cross-sectional area also lessens pressure drop across the check valve, unlike typical conical spring constructions that restrict flow
- The new CV50 has a compression spring coupled with a small stem guide that allows for an unobstructed flow path
- Quick closure to reduce water hammer - Silent shut-off is achieved via the fully automatic, spring assisted disc that closes near zero flow velocity
- The lightweight, center guided disc design creates a positive shutoff prior to flow reversal and helps to keep slamming and surges to a minimum
- Additionally, the low cracking pressure of the CV50 reduces the amount of energy required to open the valve
- Metal-to-metal seats - Precision machined sealing surfaces allow the CV50-DI to maintain a tight seal that meets or exceeds API 598 leakage requirements
- Versatile and economic design - Clearance within the CV50's body allows a butterfly valve to be installed directly on the outlet side of the valve without extra piping
- Exotic spring material, such as monel or inconel 750-X, can easily be substituted for the standard stainless steel
Applications:
Oil and Gas Production, General Industry, Chemical, Petrochemical, Power, Food and Beverage Industries
Standards/Approval:
- ANSI B16.5/B16.42
- API 598
- ASTM A536 Body
- CF8M Disc/Seat
- FM 1230
- MSS SP-6/SP-25/SP-55
