Description
Timken®, UCFL210, Flange Mount Ball Bearing Unit, Standard-Duty Non-Expansion, Series: UCFL200, 50 mm Bore, 157 mm Bolt Center-to-Center Length, 3/4 in Diameter Bolt Circle, 2-Bolt Flange Mounting, 115 mm Overall Length/Diameter, 54.6 mm Overall Depth, 197 mm Overall Height, Set Screw Locking Device, Steel Bearing, Nitrile Rubber Seal, 35.1 lb Dynamic/23.3 lb Static Load, 2800 rpm Maximum, 121 deg C, Powder Coated
Features:
- Suggested for industrial applications where normal loads are encountered
- Primarily designed for applications where the mounting area is restricted
- Unit comes assembled and ready for mounting, using bolts through the flange
- Use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment
- Timken® UCFL series housed units feature the Timken® set screw locking (UC) bearing insert
- Bearing prelubricated and ready for immediate installation
- Grease fitting supplied for relubrication
- The bonded seal design is well suited for applications involving wet or dirty environments
- Bolt hole spacing dimensions and shaft center location are interchangeable with competitive units
- Housing designed for ease of bearing replacement
- Cast iron housing
- Triple-lip bonded seal with flinger
- CN internal clearance
- Cylindrical bore single row bearing
- Open end type
- Spherical outer diameter
- M16 bolt
Applications:
Agriculture, Brick Making, Food and Beverage, Glass Making, Industrial Fans/Blowers, Materials Handling, Packaging, Paper and Printing Industries
Standards/Approval:
