Description

Timken®, TAK1 1/2, Pillow Block Ball Bearing Unit, Normal Duty, Series: TAK, 1-1/2 in Bore, 5.374 in Bolt Center-to-Center Length, 1.937 in Base to Bore Centerline, 7.063 in Overall Length, 2-7/32 in Overall Width, 4 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.031 in Base Width, Eccentric Locking Device, Tri-Ply Shroud Seal, Non-Expansion (Fixed), 7330 lb Dynamic/4460 lb Static Load, 250 deg F, 500 rpm Maximum, Cast Iron, Uncoated

Features:

• Heavier than our standard block with solid, flat feet for increased strength
• Compact, one-piece housing can be mounted in any position
• Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
• Pre-lubricated and ready for immediate installation
• Grease fitting for relubrication
• All units are supplied with G-KPPB tri-ply seal wide-inner-ring ball bearing and locking collar
• TAK with G-KPPB (tri-ply seal) wide-inner-ring ball bearings

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	1.937 in
Base Width	2.031 in
Bolt Center-to-Center Length	5.374 in
Bore Diameter	1-1/2 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	7330 lb Dynamic/4460 lb Static
Locking Device	Eccentric
Material	Cast Iron
Maximum Speed	500 rpm
Mounting Type	Two-Bolt Base
Overall Height	4 in
Overall Length	7.063 in
Overall Width	2-7/32 in
Seal Type	Tri-Ply Shroud
Series	TAK
Manufacturer	TIMKEN CO