Pillow Block Bearing, 60 mm, Timken® E-P4B-TRB, Heavy Duty

Description

Timken®, E-P4B-TRB-60MM, Pillow Block Roller Bearing Unit, Heavy Duty Type E, 60 mm Bore, 8-5/16 to 8-11/16 in Bolt Center-to-Center Length, 69.85 mm Base to Bore Centerline, 266.7 mm Overall Length, 101.6 mm Overall Width, 145.258 mm Overall Height, Four-Bolt Base Mounting, Round Bore, 88.9 mm Base Width, Double Set Screw Collar Locking Device, Triple Barrier Seal, Non-Expansion, 11600 lb Dynamic/54000 lb Static Load, -54 to 250 deg F, 2420 rpm Maximum, Cast Iron, E-Coated

Features:

• Industry leading high performance triple-barrier seals result in improved grease retention and are more effective at preventing water and mud/slurry ingress
• Rotating collar acts as an initial flinger and provides an additional barrier
• Electric deposition coatings on housings and collars provide superior corrosion resistance
• Set screws with nylon patch greatly reduce set screw back out, even in the most severe applications
• High performance Timken® bearings provide the highest rating and bearing life
• Double row bearing
• Longer bearing life
• Lower maintenance cost
• Optimized performance
• Increased uptime
• Bearing steel

Applications:

Pulp, Paper, Power Generation, Mining, Cement, Aggregate, Air-Handling Equipment, Water and Waste Water Treatment Industries

Base to Bore Centerline	69.85 mm
Base Width	88.9 mm
Bolt Center-to-Center Length	8-5/16 to 8-11/16 in
Bore Diameter	60 mm
Bore Type	Round
Expansion Type	Non-Expansion
Finish	E-Coated
Load Capacity	11600 lb Dynamic/54000 lb Static
Locking Device	Double Set Screw Collar
Material	Cast Iron
Maximum Speed	2420 rpm
Mounting Type	Four-Bolt Base
Overall Height	145.258 mm
Overall Length	266.7 mm
Overall Width	101.6 mm
Seal Type	Triple Barrier
Temperature Rating	-54 to 250 deg F
Manufacturer	Timken®