- Products - Remote Photoelectric Systems - Photoelectric Bus Amplifiers - PAB 10 - Available Types - PAB 10 A 109
|
Photoelectric Bus Amplifiers"Standard, Remote Photoelectric Systems" |
|
Type Name: PAB 10 A 109 |
Product Data Supply Voltage | 10 30 V dc / 24 V ac | Housing | Removable screw terminals | Sensing Range | 70 m | Number of Channels | 1 | Sensitivity Adjustment | Manual | Timer | On/Off Delay | Output | NPN |
---|
|
Technical Data Supply Voltage | 10 - 30 V dc or 24 V ac | Current Consumption | Max. 1,7 W | Housing Material | Polyamide | Power On Indicator | Green LED | Output Indicator | Yellow LED | Hysteresis | Approx. 35 % | Voltage Tolerance | +/- 10 % | Output, Relay | - | Output, Transistor | 30 V dc / 100 mA | Alarm Indicator | Red / yellow LED | LR Sensor Failure Indicator | Yelow LED | LT Sensor Failure Indicator | Red LED | Master/Slave Address Indicator | Green / orange LED | Sensor Monitor LED Drive | Green LED on the receiver: Power ON Yellow LED on the transmitter: PAB output activated | Response Time ton / toff, Relay | - | Response Time ton / toff, Transistor | Short range: 12 ms / 12 ms - Long range: 30 ms / 30 ms | Alarm Output, Transistor | PNP - 30 V dc / 100 mA | Test Input | Yes | Signal Level Indicator | Green LED | Operation Frequency, Relay | - | Operation Frequency, Transistor | Short range: 42 Hz - Long range: 17 Hz | Delay Time ton / toff | 0 10 sec, adjustable |
---|
|
Environmental Data Operation Temperature | 10 to +50 C | Storage Temperature | 40 to +80 C | Sealing Class | IP 40 |
---|
|
Approvals
|