Details
Product Literature and Service Sheets
Products / Centralized Lubrication Systems /
Injector Systems / AL-43 Oil Injector
Injector Systems : AL-1 Grease Injector AL-11 Grease Injector
AL-32 Grease Injector AL-43 Oil Injector Injector System
Pumps
How to Buy
AL-43 Oil Injector
FEATURES:
* Available in carbon steel
* All packing glands are American-made, Mil-Spec, Viton
* Primary piston is precisely hone fit to a clearance of 120
millionths of an inch
* The recharge piston seal is made from American-made, Mil-Spec
90-Durometer Viton. All Alemite AL-43 Series Injectors support the
recharge piston seal with a Teflon backup. This extends the life
cycle of the Alemite AL-43 Series Injector recharge piston
assembly
* The stand-alone AL-43 has a 1/4"-18 NPTF male inlet, while the
manifold version AL-43 comes with the manifold inlet bolt and
necessary hardware, which allows it to mount to any existing
Lincoln SL-43 series manifold
* The AL-43 series injectors have 1/8" O.D. tube discharge ports
* Adjustable output: .001 cu. in. to .008 cu. in. (5 Turns)
* 3-Year Warranty
* Made In U.S.A.
* 100% bolt-on replacement for Lincoln Centro-Matic SL-43
injector series stand-alone and manifold injectors
AL-43 Oil Injectors / Manifold Assembly
Images Product # Description Max. Pressure Min. Pressure Max.
Temperature
715543-A Oil Replacement Manifold Injector 1,000 psi (69 bar) 750 psi
(52 bar) 350F (177C)
715543-A1 1-Station Oil Injector / Manifold Assembly 1,000 psi (69
bar) 750 psi (52 bar) 350F (177C)
715543-A2 2-Station Oil Injector / Manifold Assembly 1,000 psi (69
bar) 750 psi (52 bar) 350F (177C)
715543-A3 3-Station Oil Injector / Manifold Assembly 1,000 psi (69
bar) 750 psi (52 bar) 350F (177C)
715543-A4 4-Station Oil Injector / Manifold Assembly 1,000 psi (69
bar) 750 psi (52 bar) 350F (177C)
System Components
Images Product # Description
387780 CLS 1000 Controller
387780
387449-1 2-way solenoid valve, 115 VAC
339934 Air FRL (filter)
339934
339947 FRL (gauge 1/4 mini 0-30)
339948 FRL (gauge 1/4 mini 0-60)
339949 FRL (gauge 1/4 mini 0-300)
339925 FRL bracket
339925
340098 Pressure switch
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Centralized Lubrication Systems /
Series Progressive Systems / Series Progressive System
Accessories
Series Progressive Systems : System Configuration Wizards SP
Series Modular Divider Valves Splitter Valves AML/AMC Modular
Divider Vales HP Series Modular Divider Valves LX Series
High-Flow Valves Series Progressive System Accessories Series
Progressive System Pumps Accessories
How to Buy
Series Progressive System Accessories
SP and HP Accessories
1,000 psi 1,500 psi 2,000 psi 2,500 psi 3,000 psi 3,500 psi
Reset Indicator 710100 710150 710200 710250 710300 710350
In-line Filter w/ Element N/A N/A 715495 Grease 149-Micron 715255 Oil
25-Micron 715105 Oil 10-Micron 715035 Oil 3-Micron
Replacement Element N/A N/A 715496 715256 715106 715036
Visual Cycle Indicator N/A N/A N/A N/A N/A 715575
Options
Images Product # Description
715576 Proximity Switch, XP-Grp. B
715577 Cycle Switch Assembly, SPDT
715578 Cycle Switch Assembly, DPDT
715575 Visual Cycle Indicator
715584 Cross Porting Kit
715583 Singling Kit
Check Valves
Images Product # Type Inlet Outlet
715579 Outlet Check 1/8" NPTF 1/8" NPSF
715512 Terminating Check 1/8" NPSF 1/8" NPTF
715525 Double Poppet Terminating Check 1/4" NPSF 1/4" NPSF
Anchor Blocks
Images Product # Description
710184 1/8" Cross
710144 1/4" Cross
710145 5-Way Gauge / Blowout Anchor Block
710182 1/8" 90 Elbow
710142 1/4" 90 Elbow
710181 1/8" Straight
710141 1/4" Straight
710183 1/8" TEE
710143 1/4" TEE
Blowout Fitting
Images Product # Description
715594 1/8" Blowout Fitting
Rupture Discs
Images Product # Description
710101 1,000 psi, black
710151 1,500 psi, yellow
710171 1,750 psi, red
710201 2,000 psi, orange
710231 2,350 psi, silver
710251 2,500 psi, pink
710301 3,000 psi, blue
710351 3,500 psi, purple
710501 5,000 psi, brown
710601 6,000 psi, grey
System Components
Images Product # Description
387780 CLS 1000 Controller
387780
387449-1 2-way solenoid valve, 115 VAC
339934 Air FRL (filter)
339934
339947 FRL (gauge 1/4 mini 0-30)
339948 FRL (gauge 1/4 mini 0-60)
339949 FRL (gauge 1/4 mini 0-300)
339925 FRL bracket
339925
340098 Pressure switch
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Pumps / Grease Pumps / High
Pressure (Grease Pump) Selection Guide
Grease Pumps : High Pressure (Grease Pump) Selection Guide
Manual Grease Pumps Pneumatic Grease Pumps Electric Pumps
(Portable) Pump Accessories
How to Buy
High Pressure (Grease Pump) Selection Guide
The chart below lists general high pressure pump selection guidelines.
Each aplication varies and should be carefully considered for special
conditions that may require a pump selection other than the standard
recommendations listed.
These conditions include, but are not limited to:
* Viscosity of product pumped
* Ambient temperature conditions
* Simultaneous operation of several dispensing outlets
* Dispensing volume requirements
When measuring total pump distance, the hose length of dispensing
reels should be included in total distance.
Pump distance (feet) Up to 4 ft Up to 50 ft Up to 75 ft 75-150 ft Up
to 150 ft Over 150 ft Over 150 ft
Number of outlets 1 1 1-3 1-3 3+ 1-3 3+
Drum size 35 lbs. (9911 includes follower plate and cover) N/A 9911
Series** N/A N/A N/A N/A N/A
120 lbs. (only 9950-A1 and 8550-A1 include follwer plate and drum
cover) N/A 9951 Series** 9950-A1, 8550-A1 9940, 8540-A1 7785-B5,
7786-C 7785-B5 7786-AC
400 lbs. (only 9979-A includes follower plate & drum cover) 7216-A4*
9979-A, 8559-B 9979-A, 8559-B 9949, 8549-B1 7785-A5, 7786-A5 7885-A5
7786-A5
Bulk Tote Tank N/A N/A 9930 7730 7730 7730 7730
Tubing recommendation (hydraulic fitting) 5/8" OD 0.083" Wall 5/8" OD
0.083" Wall 5/8" OD 0.083" Wall 3/4" OD 0.083" Wall 1" OD 0.125" Wall
1" OD 0.125" Wall 1" OD 0.125" Wall
* High volume pump
** Specific pump selection depends on what accessories are required
NOTE: For pumping non-petroleum based products, contact Alemite Tech
Services. Alemite recommends using hydraulic tubing for all
installations.
WARNING: Do not operate pump at higher pressure than lowest rated part
of system. Severe injury may result if pump is operated at pressures
greater than the lowest component in the distribution system.
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Pumps / Grease Pumps /
Pneumatic Grease Pumps / RAM Pumps (Stationary)
Pneumatic Grease Pumps : RAM Pumps (Stationary) RAM Pumps
(Portable) Standard Duty (Stationary) Standard Duty (Portable)
Industrial Pumps (Stationary)
How to Buy
Pneumatic RAM Pumps (Stationary)
Alemite Stationary RAM Pumps provide quiet operation and quick
serviceability. Capable of transferring grease at a rate of 4.5 lb.
per minute, these double-acting pumps are designed to reduce line
pulsation and allow lower operating pressure. Ideal for piped
installations of moderate length.
FEATURES:
* Internal muffler and an innovative airflow design help Alemite RAM
Pumps meet OSHA noise requirements (85 dB)
* Orientation of material outlet and air inlet can be easily
adjusted 360
* Pumps are easy to use and designed to operate with or without a
lubricator
* Air motor and spool valve are easily accessible without removing
the downtube
* Flexible follower works with straight and tapered containers
SPECIFICATIONS:
* Air inlet: 1/4" NPTF(f)
* Material outlet: 3/8" NPTF(f)
* Air motor diameter: 3"
* Metric RAM pumps meet European standards (CE)
* Recommended for piped installations of up to 150 ft
INCLUDED ITEMS:
* (9930): Male 3" Cam Lock Adapter for mounting pump to bulk grease
container
Images Product # Drum Size Pump Ratio Delivery Weight Follower* Cover*
9940 120 lb. 70:1 3.25 lb./min. 28 lb. 338802 338371
9940
9949 400 lb. 70:1 3.25 lb./min. 32 lb. 338911 338163
9950-1 120 lb. 50:1 4.5 lb./min. 19 lb. Included: 338802 Included:
338371
9950-A1 120 lb. 50:1 4.5 lb./min. 32 lb. 338802 338371
9979 400 lb. 50:1 4.5 lb./min. 25 lb. 338911 338163
9979
9979-M 400 lb. 50:1 4.5 lb./min. 25 lb. 338911 338163
9979-M
9979-A 400 lb. 50:1 4.5 lb./min. 49 lb. Included: 338911 Included:
338163
9950-B1 12.5 kg (35 lb.) 50:1 2.04 kg/min. 16 lb. 338991 338981
9950-C1 20 kg 50:1 2.04 kg/min. 18 lb. 338992 338982
9950-1 50 kg (120 lb.) 50:1 2.04 kg/min. 19 lb. 338802 338371
9950-D1 180 kg (400 lb.) 50:1 2.04 kg/min. 23 lb. 338911 338984
9979-M 180 kg (400 lb.) 50:1 2.0 kg/min 25 lb. Included: 338911
Included: 338984
9979-M
9930** Bulk 50:1 4.5 lb./min. 16 lb. Not required Not required
*Recommended Accessory
**Bulk Tote Tank pump designed for horizontal mounting and space
constraints
NOTE: Delivery based on NLGI #2 at 77F, 150 psi. Delivery rate may
vary based on grease type, temperature, pressure, distance pumped and
other conditions.
Keywords: Alemite Lubrication Systems, fluid handling, Parts and service kits.
Products ; Lubrication Accessories ; Compressed Air Component Accessories ;Modular Accessories
