Details
High Pressure (Grease Pump) Selection Guide
The chart below lists general high pressure pump selection guidelines.
Each aplication varies and should be carefully considered for special
conditions that may require a pump selection other than the standard
recommendations listed.
These conditions include, but are not limited to:
* Viscosity of product pumped
* Ambient temperature conditions
* Simultaneous operation of several dispensing outlets
* Dispensing volume requirements
When measuring total pump distance, the hose length of dispensing
reels should be included in total distance.
Pump distance (feet) Up to 4 ft Up to 50 ft Up to 75 ft 75-150 ft Up
to 150 ft Over 150 ft Over 150 ft
Number of outlets 1 1 1-3 1-3 3+ 1-3 3+
Drum size 35 lbs. (9911 includes follower plate and cover) N/A 9911
Series** N/A N/A N/A N/A N/A
120 lbs. (only 9950-A1 and 8550-A1 include follwer plate and drum
cover) N/A 9951 Series** 9950-A1, 8550-A1 9940, 8540-A1 7785-B5,
7786-C 7785-B5 7786-AC
400 lbs. (only 9979-A includes follower plate & drum cover) 7216-A4*
9979-A, 8559-B 9979-A, 8559-B 9949, 8549-B1 7785-A5, 7786-A5 7885-A5
7786-A5
Bulk Tote Tank N/A N/A 9930 7730 7730 7730 7730
Tubing recommendation (hydraulic fitting) 5/8" OD 0.083" Wall 5/8" OD
0.083" Wall 5/8" OD 0.083" Wall 3/4" OD 0.083" Wall 1" OD 0.125" Wall
1" OD 0.125" Wall 1" OD 0.125" Wall
* High volume pump
** Specific pump selection depends on what accessories are required
NOTE: For pumping non-petroleum based products, contact Alemite Tech
Services. Alemite recommends using hydraulic tubing for all
installations.
WARNING: Do not operate pump at higher pressure than lowest rated part
of system. Severe injury may result if pump is operated at pressures
greater than the lowest component in the distribution system.
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Pumps / Grease Pumps /
Pneumatic Grease Pumps / RAM Pumps (Portable)
Pneumatic Grease Pumps : RAM Pumps (Stationary) RAM Pumps
(Portable) Standard Duty (Stationary) Standard Duty (Portable)
Industrial Pumps (Stationary)
How to Buy
Pneumatic RAM Pumps (Portable)
Alemite Mobile RAM Grease Pumps offer portability, quiet operation and
quick serviceability. Most models come equipped with all necessary
accessories for fast and easy setup.
FEATURES:
* Air inlet: 1/4" NPTF(f)
* Material outlet: 3/8" NPTF(f)
* Air motor diameter: 3"
* Pumps are 50:1 ratio, except 9941 is 70:1 ratio
* Flexible follower works with straight and tapered containers
INCLUDED ITEMS:
* Contol Valve (6320-3)
* 7' Material Hose (317875-7)
* Z-Swivel (B52752)
Images Product # Drum Size Delivery Cover* Follower* Dolly* Other*
Weight Bare Pump
9911-A1 see note** 4.5 lb./min. 323496-A4 see note** 393629 N/A 68 lb.
9911-R1
9911-J 35 lb. 4.5 lb./min. 338166 337665 No Built-in carrying handle
29 lb. 9950-C1
9911-J
9911-Z1 35 lb. 4.5 lb./min. 338166 337665 338958 N/A 50 lb. 9911-1
9941 120 lb. 3.25 lb./min. 338371 338802 316315-5 N/A 54 lb. 9940
9951-1 120 lb. 4.5 lb./min. 338371 338802 316315-5 Built-in holster
for hose and handle 50 lb. 9950-1
9951-1
9951-S1 120 lb. 4.5 lb./min. 338371 338802 N/A Built-in holster for
hose and handle 37 lb. 9950
9951-T1 120 lb. 4.5 lb./min. 338371 338802 338958 Built-in holster for
hose and handle 57 lb. 9950-1
9911-HA1 12.5 kg. 2.04 kg./min. 338981 338991 Order separately 338958
Built-in carrying handle 31 lb. N/A
9911-HB1 20 kg. 2.04 kg./min. 338982 338992 Order separately 338958
N/A 37 lb. N/A
9911-HC1 50 kg. (120 lb.) 2.04 kg./min. 338983 338993 Order separately
338958 N/A 42 lb. N/A
9911-B1 120 lb. 4.5 lb./min. 323496-A4 N/A N/A N/A 36 lb. 9911-R1
9911-C1 35 lb. 4.5 lb./min. 338166 337665 N/A N/A 21 lb. 9911-1
*Included items (unless noted)
**9911-A1 will hold 70 lb. bulk grease or 35 lb. original refinery
pail. Use follower (338802) with 70 lb. bulk grease and follower
(337665) with 35 lb. refinery pail.
NOTE: Delivery based on NLG1 #2 at 77F, 150 psi. Delivery rate may
vary based on grease type, temperature, pressure, distance pumped and
other conditions.
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Pumps / Grease Pumps /
Pneumatic Grease Pumps / RAM Pumps (Stationary)
Pneumatic Grease Pumps : RAM Pumps (Stationary) RAM Pumps
(Portable) Standard Duty (Stationary) Standard Duty (Portable)
Industrial Pumps (Stationary)
How to Buy
Pneumatic RAM Pumps (Stationary)
Alemite Stationary RAM Pumps provide quiet operation and quick
serviceability. Capable of transferring grease at a rate of 4.5 lb.
per minute, these double-acting pumps are designed to reduce line
pulsation and allow lower operating pressure. Ideal for piped
installations of moderate length.
FEATURES:
* Internal muffler and an innovative airflow design help Alemite RAM
Pumps meet OSHA noise requirements (85 dB)
* Orientation of material outlet and air inlet can be easily
adjusted 360
* Pumps are easy to use and designed to operate with or without a
lubricator
* Air motor and spool valve are easily accessible without removing
the downtube
* Flexible follower works with straight and tapered containers
SPECIFICATIONS:
* Air inlet: 1/4" NPTF(f)
* Material outlet: 3/8" NPTF(f)
* Air motor diameter: 3"
* Metric RAM pumps meet European standards (CE)
* Recommended for piped installations of up to 150 ft
INCLUDED ITEMS:
* (9930): Male 3" Cam Lock Adapter for mounting pump to bulk grease
container
Images Product # Drum Size Pump Ratio Delivery Weight Follower* Cover*
9940 120 lb. 70:1 3.25 lb./min. 28 lb. 338802 338371
9940
9949 400 lb. 70:1 3.25 lb./min. 32 lb. 338911 338163
9950-1 120 lb. 50:1 4.5 lb./min. 19 lb. Included: 338802 Included:
338371
9950-A1 120 lb. 50:1 4.5 lb./min. 32 lb. 338802 338371
9979 400 lb. 50:1 4.5 lb./min. 25 lb. 338911 338163
9979
9979-M 400 lb. 50:1 4.5 lb./min. 25 lb. 338911 338163
9979-M
9979-A 400 lb. 50:1 4.5 lb./min. 49 lb. Included: 338911 Included:
338163
9950-B1 12.5 kg (35 lb.) 50:1 2.04 kg/min. 16 lb. 338991 338981
9950-C1 20 kg 50:1 2.04 kg/min. 18 lb. 338992 338982
9950-1 50 kg (120 lb.) 50:1 2.04 kg/min. 19 lb. 338802 338371
9950-D1 180 kg (400 lb.) 50:1 2.04 kg/min. 23 lb. 338911 338984
9979-M 180 kg (400 lb.) 50:1 2.0 kg/min 25 lb. Included: 338911
Included: 338984
9979-M
9930** Bulk 50:1 4.5 lb./min. 16 lb. Not required Not required
*Recommended Accessory
**Bulk Tote Tank pump designed for horizontal mounting and space
constraints
NOTE: Delivery based on NLGI #2 at 77F, 150 psi. Delivery rate may
vary based on grease type, temperature, pressure, distance pumped and
other conditions.
Keywords: Alemite Lubrication Systems, fluid handling, Parts and service kits.
Products ; Lubrication Accessories ; Pump Accessories ;Strainers
