Details
Modular Accessories
Modular Lockout Valves *
Images Product # Port
339882 1/4"
339882
339885 3/8"
339888 1/2"
Modular Body Connectors **
Images Product # For Modular Size
339890 1/4 & 3/8"
339890
339893 1/2"
Modular Wall Mounting Brackets
Images Product # For Modular Size
339895 1/4" & 3/8"
339895
339898 1/2"
Modular Manifold Blocks ***
Images Product # For Modular Size
339900 1/4"
339900
339903 1/2"
Modular Port Adapters
Images Product # For Modular Size
339905 1/4"
339905
339908 3/8"
339911 1/4"
339913 3/8"
339915 1/2"
Panel Mount Nut
Images Product # For Modular Size
339920 1/4" & 3/8"
339920
339923 1/2"
Wall-Mount Brackets
Images Product # For Modular Size Use With
339925 1/4" & 3/8" Filter, Lubricator
339925
339928 1/4" & 3/8" Regulator, Piggyback
339930 1/2" Filter, Lubricator
339932 1/2" Regulator, Piggyback
339932
Air Pressure Gauges
Images Product # Dial Range Connection
339947 0-60 psi 1/4" NPT
339948 0-160 psi 1/4" NPT
339949 0-300 psi 1/4" NPT
*Alemite Lockout Valves isolate the modular components so they can be
easily removed from the line, allowing for quick maintenance
** In situations where two or more components are connected, Alemite
Modular Body Connectors are ideal in allowing easy assembly
*** Alemite Modular Manifold Blocks provide additional outlets between
unit ports
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Pumps / Grease Pumps / High
Pressure (Grease Pump) Selection Guide
Grease Pumps : High Pressure (Grease Pump) Selection Guide
Manual Grease Pumps Pneumatic Grease Pumps Electric Pumps
(Portable) Pump Accessories
How to Buy
High Pressure (Grease Pump) Selection Guide
The chart below lists general high pressure pump selection guidelines.
Each aplication varies and should be carefully considered for special
conditions that may require a pump selection other than the standard
recommendations listed.
These conditions include, but are not limited to:
* Viscosity of product pumped
* Ambient temperature conditions
* Simultaneous operation of several dispensing outlets
* Dispensing volume requirements
When measuring total pump distance, the hose length of dispensing
reels should be included in total distance.
Pump distance (feet) Up to 4 ft Up to 50 ft Up to 75 ft 75-150 ft Up
to 150 ft Over 150 ft Over 150 ft
Number of outlets 1 1 1-3 1-3 3+ 1-3 3+
Drum size 35 lbs. (9911 includes follower plate and cover) N/A 9911
Series** N/A N/A N/A N/A N/A
120 lbs. (only 9950-A1 and 8550-A1 include follwer plate and drum
cover) N/A 9951 Series** 9950-A1, 8550-A1 9940, 8540-A1 7785-B5,
7786-C 7785-B5 7786-AC
400 lbs. (only 9979-A includes follower plate & drum cover) 7216-A4*
9979-A, 8559-B 9979-A, 8559-B 9949, 8549-B1 7785-A5, 7786-A5 7885-A5
7786-A5
Bulk Tote Tank N/A N/A 9930 7730 7730 7730 7730
Tubing recommendation (hydraulic fitting) 5/8" OD 0.083" Wall 5/8" OD
0.083" Wall 5/8" OD 0.083" Wall 3/4" OD 0.083" Wall 1" OD 0.125" Wall
1" OD 0.125" Wall 1" OD 0.125" Wall
* High volume pump
** Specific pump selection depends on what accessories are required
NOTE: For pumping non-petroleum based products, contact Alemite Tech
Services. Alemite recommends using hydraulic tubing for all
installations.
WARNING: Do not operate pump at higher pressure than lowest rated part
of system. Severe injury may result if pump is operated at pressures
greater than the lowest component in the distribution system.
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Pumps / Grease Pumps /
Pneumatic Grease Pumps / RAM Pumps (Stationary)
Pneumatic Grease Pumps : RAM Pumps (Stationary) RAM Pumps
(Portable) Standard Duty (Stationary) Standard Duty (Portable)
Industrial Pumps (Stationary)
How to Buy
Pneumatic RAM Pumps (Stationary)
Alemite Stationary RAM Pumps provide quiet operation and quick
serviceability. Capable of transferring grease at a rate of 4.5 lb.
per minute, these double-acting pumps are designed to reduce line
pulsation and allow lower operating pressure. Ideal for piped
installations of moderate length.
FEATURES:
* Internal muffler and an innovative airflow design help Alemite RAM
Pumps meet OSHA noise requirements (85 dB)
* Orientation of material outlet and air inlet can be easily
adjusted 360
* Pumps are easy to use and designed to operate with or without a
lubricator
* Air motor and spool valve are easily accessible without removing
the downtube
* Flexible follower works with straight and tapered containers
SPECIFICATIONS:
* Air inlet: 1/4" NPTF(f)
* Material outlet: 3/8" NPTF(f)
* Air motor diameter: 3"
* Metric RAM pumps meet European standards (CE)
* Recommended for piped installations of up to 150 ft
INCLUDED ITEMS:
* (9930): Male 3" Cam Lock Adapter for mounting pump to bulk grease
container
Images Product # Drum Size Pump Ratio Delivery Weight Follower* Cover*
9940 120 lb. 70:1 3.25 lb./min. 28 lb. 338802 338371
9940
9949 400 lb. 70:1 3.25 lb./min. 32 lb. 338911 338163
9950-1 120 lb. 50:1 4.5 lb./min. 19 lb. Included: 338802 Included:
338371
9950-A1 120 lb. 50:1 4.5 lb./min. 32 lb. 338802 338371
9979 400 lb. 50:1 4.5 lb./min. 25 lb. 338911 338163
9979
9979-M 400 lb. 50:1 4.5 lb./min. 25 lb. 338911 338163
9979-M
9979-A 400 lb. 50:1 4.5 lb./min. 49 lb. Included: 338911 Included:
338163
9950-B1 12.5 kg (35 lb.) 50:1 2.04 kg/min. 16 lb. 338991 338981
9950-C1 20 kg 50:1 2.04 kg/min. 18 lb. 338992 338982
9950-1 50 kg (120 lb.) 50:1 2.04 kg/min. 19 lb. 338802 338371
9950-D1 180 kg (400 lb.) 50:1 2.04 kg/min. 23 lb. 338911 338984
9979-M 180 kg (400 lb.) 50:1 2.0 kg/min 25 lb. Included: 338911
Included: 338984
9979-M
9930** Bulk 50:1 4.5 lb./min. 16 lb. Not required Not required
*Recommended Accessory
**Bulk Tote Tank pump designed for horizontal mounting and space
constraints
NOTE: Delivery based on NLGI #2 at 77F, 150 psi. Delivery rate may
vary based on grease type, temperature, pressure, distance pumped and
other conditions.
Keywords: Alemite Lubrication Systems, fluid handling, Parts and service kits.
Products ; Lubrication Accessories ; Compressed Air Component Accessories ;Modular Accessories
