Details
Oil Mist Accessories
Oil Mist Accessories
Thermo-Aire Heater Kit 115 VAC
383808-A4 Thermo-Aire Heater Kit 115 VAC
* Used to heat incoming air for misting of high-viscosity oils that
do not mist at ambient temperatures (viscosities between 1,000 to
6,000 SSU @ 100F)
* Unit can also be used to increase and stabilize the air/oil ratio
of all oils under varying ambient temperatures.
* Use with medium-output generators only
* 115 VAC
* 60/50 Hz
* Wattage: 600
Thermo-Aire Heater Kit 230 VAC
383808-B4 Thermo-Aire Heater Kit 230 VAC
* Used to heat incoming air for misting of high-viscosity oils that
do not mist at ambient temperatures (viscosities between 1,000 to
6,000 SSU @ 100F)
* Unit can also be used to increase and stabilize the air/oil ratio
of all oils under varying ambient temperatures
* Use with medium-output generators only
* 230 VAC
* 60/50 Hz
* Wattage: 600
Mist Monitor
387596 Mist Monitor
* Fiber-optic sensor is designed to continuously monitor the
established output of the oil mist generator
* Sensor responds to changes in air/oil ratio of mist passing
through the manifold
* Unit will provide an electronic alarm signal if the mist density
falls below preset limits
* Included Items: Electronic Control Cabinet, Fiber-Optic Cables,
Mist Manifold
Mist Pressure Switch
385033 Mist Pressure Switch
* Safety switch used to respond to drop or rise of oil mist line
pressure
* Can be used to energize a warning signal during machine operation
* May also be used to prevent machine startup when manifold pressure
is not within accepted limits
* Range of adjustment: .03 psi (0.8" H2O) to 3.0 psi (83" H2O)
* Factory set operating parameters: 8" H2O on falling pressure, 55"
H2O on rising pressure
* Contact rating: 10 amp @ 115 VAC and 230 VAC
Sight Assembly with bleed hole
385662 Sight Assembly with bleed hole
* Permits visual inspection of condensed oil after passing through a
bearing housing
* Includes a bleed hole to prevent oil from backing up into bearing
cavity
* Used with a dry sump
* Constructed of sturdy transparent acrylic
* Installed in the drain hole commonly provided at the bottom of a
bearing housing
* Connection: 1/2" NPT(m)
* For use with High-Volume Bucket Pump (7181-4)
Sight Assembly without bleed hole
385662-A1 Sight Assembly without bleed hole
* Permits visual inspection of condensed oil after passing through a
bearing housing
* Used with a dry sump
* Constructed of sturdy transparent acrylic
* Installed in the drain hole commonly provided at the bottom of a
bearing housing
* Connection: 1/2" NPT(m)
* For use with High-Volume Bucket Pump (7181-4)
Reservoir Refill Hose Assembly
380696 Reservoir Refill Hose Assembly
* 7', 3/8" I.D. hose
* 40-micron filter
* Loader coupler assembly
* Connect directly to pump (7181-4)
Air Filter/Regulator with Gauge
387335 Air Filter/Regulator with Gauge
* Removes water and particulates from incoming air supply
* Controls system pressure
* 5-micron element
* Automatic drain
* 1/4" NPT(f) ports
* Max. inlet pressure: 150 psi (10 bar)
* Max. outlet pressure: 60 psi (4 bar)
Alarm Annunciator 120 VAC
387275 Alarm Annunciator 120 VAC
* Provides visual and audible warning of system fault conditions,
including: low oil level, high mist pressure, low mist pressure,
low air temperature
* Selector switch can be used to disable the horn during trouble
shooting of the system fault
* Horn also features volume control
* Dry contacts included to energize a remote alarm (max. rating of
10 amp @ 120/220 VAC)
Alarm Annunciator 220 VAC
387275-A Alarm Annunciator 220 VAC
* Provides visual and audible warning of system fault conditions,
including: low oil level, high mist pressure, low mist pressure,
low air temperature
* Selector switch can be used to disable the horn during trouble
shooting of the system fault
* Horn also features volume control
* Dry contacts included to energize a remote alarm (max. rating of
10 amp @ 120/220 VAC)
Mounting Bracket
387344 Mounting Bracket
* Easy to install
* Provides convenient mounting of bare pint units 3922-A and 3922-B
Oil Mist Fluid Solenoid
383647-1 Oil Mist Fluid Solenoid
* Helps control refills of oil mist units
Air Solenoid Valve 120 VAC
387449-1 Air Solenoid Valve 120 VAC
* 120 VAC
* Shuts off air supply when machinery is not running
* 1/4" NPT(f) ports
* 1/2" NPT(f) conduit connection
* 16-VA holding current
* 30-VA inrush current
Air Solenoid Valve 220 VAC
387449 Air Solenoid Valve 220 VAC
* 220 VAC
* Shuts off air supply when machinery is not running
* 1/4" NPT(f) ports
* 1/2" NPT(f) conduit connection
* 16-VA holding current
* 30-VA inrush current
Oil Heater 120 VAC
387323 Oil Heater 120 VAC
* For gallon units
* 120 VAC
* Maintains oil at 100F (38C)
* 100 watt
* Recommended for outdoor installations or when ambient temperature
may drop below 70F (21C)
Oil Heater 220 VAC
387323-A Oil Heater 220 VAC
* For gallon units
* 220 VAC
* Maintains oil at 100F (38C)
* 100 watt
* Recommended for outdoor installations or when ambient temperature
may drop below 70F (21C)
Automatic Reservoir Filler for Medium-Output Generators 385787
Automatic Reservoir Filler for Medium-Output Generators Details
* Place pump directly into 55-gallon drum at generator location
* Eliminates transporting oil
* Generators refilled automatically according to need
* Oil level is constantly maintained
* Eliminates spills
* Prevents contaminated oil from entering system
* Maintains constant oil temperature
* Included Items: 2:1 Ratio Pump, FRL, Shut-off Valve, 7' Connecting
Hose
Automatic Reservoir Filler for High-Output Generators 385789
Automatic Reservoir Filler for High-Output Generators Details
* Place pump directly into 55-gallon drum at generator location
* Eliminates transporting oil
* Generators refilled automatically according to need
* Oil level is constantly maintained
* Eliminates spills
* Prevents contaminated oil from entering system
* Maintains constant oil temperature
* Included Items: 2:1 Ratio Pump, FRL, Shut-off Valve, 7' Connecting
Hose
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Reels / High Capacity
Reels : Heavy Duty Severe Duty Narrow Double Post Hose
Twin Hose High Capacity Shielded Oxygen/Acetylene
Heavy Duty Electric Cord Standard Duty Light & Electric Cord
Compact Air/Water Stainless Steel Hand Crank Corrosion
Resistant Aluminum Accessories
How to Buy
High Capacity Reels
Alemite High-Capacity Reels offer high-volume delivery in the most
severe outdoor conditions. These high-capacity reels are corrosion
resistant and extremely reliable.
FEATURES:
* Sealed spring cassette protects the power spring from corrosion
caused by water and dirt
* Sealed rollers eliminate contamination that can bind the hose
guide rollers
* Superior bearing performance reduces torque load on power spring
for smooth retraction and durability
* Outlet port swivel nut makes installing the delivery hose quick
and easy
* Adjustable arm allows for mounting on a floor, ceiling or wall.
Narrow width allows for more reels to be mounted along a truck
bed.
* Double arm provides extra support for a larger hose during use.
Four-corner bolthole pattern on outside of base provides extra
stability.
* High-volume capacity flow passage reduces fill rate time and
improves efficiency
* Capable of handling up to 100' of 1/2" diameter or up to 50' of 1"
diameter hose
* Lifetime warranty on hose guide assembly
* Included Items: Reel, Delivery Hose and Hose Stop
Compatibility: Water, air, oil, fuel
Pressure Configuration: High, medium, low
Mounting: Floor, wall, ceiling, truck bed
Air/Water Reels
Images Product # Pressure Bare Reel Delivery Hose Spec. Weight Reel
Inlet Delivery Hose Outlet
8080-C 300 psi 7341 1/2" x 80' (317811-80) 115 lb. 1/2" NPTF(f) 1/2"
NPTF(m)
8080-D 300 psi 7341 1/2" x 100' (317811-100) 125 lb. 1/2" NPTF(f) 1/2"
NPTF(m)
Oil Reels
Images Product # Pressure Bare Reel Delivery Hose Spec. Weight Reel
Inlet Delivery Hose Outlet
8080-B 1,500 psi 7341 1/2" x 80' (317813-80) 125 lb. 1/2" NPTF(f) 1/2"
NPTF(m)
8080-B
8080-H 1,500 psi 7341 1/2" x 100' (317813-100) 154 lb. 1/2" NPTF(f)
1/2" NPTF(m)
Grease Reels
Images Product # Pressure Bare Reel Delivery Hose Spec. Weight Reel
Inlet Delivery Hose Outlet
8080-A* 6,000 psi 7340 3/8" x 80' (317870-80) 120 lb. 3/8" NPTF(m)
1/4" NPTF(f)
Fuel Reels
Images Product # Pressure Bare Reel Delivery Hose Spec. Weight Reel
Inlet Delivery Hose Outlet
8080-E 1,000 psi 7342 3/4" x 50' (317868-50) 145 lb. 1" NPTF(f) 3/4"
NPTF(f)
8080-F 1,000 psi 7342 3/4" x 70' (317868-70) 155 lb. 1" NPTF(f) 3/4"
NPTF(f)
8080-G 1,000 psi 7342 1" x 50' (317869-50) 165 lb. 1" NPTF(f) 1"
NPTF(f)
8080-J 150 psi 7342 1" x 50' (339634-50) 165 lb. 1" NPTF(f) 1" NPTF(f)
Twin Hose Reels
Images Product # Pressure Bare Reel Delivery Hose Spec. Weight
Connecting Hose Inlet Delivery Hose Outlet
8080-K 3,000 psi 7343 3/8" x 80' (340326-80) 165 lb. 3/8" NPSM(f) 3/8"
NPSM(m)
8080-K
8080-L 3,000 psi 7344 1/2" x 80' (340328-80) 180 lb. 1/2" NPSM(f) 1/2
NPTF(m)
8080-L
* "Z" swivel must be ordered separately
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Reels / Twin Hose
Reels : Heavy Duty Severe Duty Narrow Double Post Hose
Twin Hose High Capacity Shielded Oxygen/Acetylene
Heavy Duty Electric Cord Standard Duty Light & Electric Cord
Compact Air/Water Stainless Steel Hand Crank Corrosion
Resistant Aluminum Accessories
How to Buy
Twin Hose Reels
Alemite's new twin hose reels are constructed to the same high quality
standards as all of our reels. Our reels feature rigid construction,
sealed design, and high volume capacity, making them the ideal choice
for a variety of rugged outdoor uses. Applications include hydraulic
cylinders, tools, and equipment. These reels are available in severe
duty, a narrow double post, and a high capacity double post designs.
FEATURES:
* Sealed spring cassette protects the power spring from corrosion
caused by water and dirt
* Lifetime warranty on spring
* Sealed rollers eliminate contamination that can bind the hose
guide rollers
* Superior bearing performance reduces torque load on power spring
for smooth retraction and durability
* Outlet port swivel nut makes installing the delivery hose quick
and easy
* Adjustable arm allows for mounting on a floor, ceiling or wall.
Narrow width allows for more reels to be mounted along a truck bed
* Double arm provides extra support for a larger hose during use.
Four-corner bolthole pattern on outside of base provides extra
stability
* High-volume capacity flow passage reduces fill rate time and
improves efficiency
* Capable of handling up to 80' of 1/2" diameter hose
* Single body swivel which provides more bearing length for better
support reducing the wear. (Narrow Double Post and Severe Duty
Reel Models)
Images Product # Description Bare Reel Delivery Hose Spec. Reel Inlet
Delivery Hose Outlet Hose Stop Pressure
8078-S 3/8" X 30' Twin Hose Severe Duty Reel Assembly 7339 340326-30
3/8" NPSM (f) 3/8" NPTF (m) 339389-3 3000 psi
8078-S
8080-K 3/8" X 80' Twin Hose High Capacity Reel Assembly 7343 340326-80
3/8" NPSM (f) 3/8" NPTF (m) 339389-3 3000 psi
8080-K
8080-L 1/2" X 80' Twin Hose High Capacity Reel Assembly 7344 340328-80
1/2" NPSM(f) 1/2" NPTF(m) 339389-4 3000 psi
8080-L
8081-H 3/8" X 30' Twin Hose Narrow Double Post Reel Assembly 7374
340326-30 3/8" NPSM(f) 3/8" NPTF(m) 339389-3 3000 psi
8081-H
Keywords: Alemite Lubrication Systems, fluid handling, Parts and service kits.
Products ; Lubrication Accessories ; Centralized Lubrication System Accessories ;Oil Mist Systems
