Details
Product Literature and Service Sheets
Products / Pumps / Chemical and Material Handling
/ Class 1 & 2
Chemical and Material Handling : GT Pumps Class 1 Class 1
& 2 Class 1, 2 & 3 Class 2, 3 & 4 Class 3 & 4 Class 4
Class 5 & 6 Undercoating Pumps Diaphragm Pumps
Downtubes Electric Transfer Pumps Bushings
How to Buy
Class 1 & 2: Light to Medium Fluids (5 to 4,000 cp)
Alemite Class 1 & 2 Pumps are designed to handle light to medium
fluids such as inks, flavoring and oils. The double ball downtube
ensures positive priming for reliable operation. Recommended for
dispensing applications.
FEATURES:
* Stainless steel and carbon steel models are suitable for pumping
corrosive liquids
* Stub pumps require appropriate downtube
* Air inlet: 1/4"
RECOMMENDED ACCESSORIES:
* Single-Post Hoist (2741-4 or 2742-4) for models 7216-S3, 7216-4,
7880-C1
* Single-Post Hoist (2741-4 or 2742-4) requires Adapter Plate
(322593)
Images Product # Wetted Material Seal Material Drum Size Pump Ratio
Free Flow per min Cycles per gal. Material Inlet Material Outlet
Weight
7216-4 Carbon Steel Teflon & Nylon II 55 gal. 1:1 14 gal. 25 N/A 1"
NPTF(f) 14 lb.
7216-4
7216-A4 Carbon Steel Teflon & Nylon II 55 gal. 1:1 33 gal. 25 N/A 1"
NPTF (f) 18 lb.
7216-A4
7216-S3 Stainless Steel Teflon 55 gal. 1:1 14 gal. 25 1" NPTF (f) 1"
NPTF (f) 22 lb.
7216-S3
7216-B Carbon Steel Buna 55 gal. 2:1 7 gal. 32 N/A 3/8" NPTF (f) 18
lb.
7216-B
7222-B4 Carbon Steel Viton Stub 1:1 14 gal. 25 1-1/2" NPTF (f) 1" NPTF
(f) 12 lb.
7222-B4
7880-C1 Stainless Steel Teflon Stub 2.5:1 7 gal. 38 1" NPTF (f) 3/8"
NPTF (f) 14 lb.
7880-C1
WARNING! Always consult a MATERIAL COMPATIBILITY CHART to ensure that
the material being pumped and the cleaning product used for the pump
are compatible with the material composition of the pump and hose.
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Pumps / Oil Pumps / Medium Pressure
(Oil Pump) Selection Guide
Oil Pumps : Medium Pressure (Oil Pump) Selection Guide Manual
Oil Pumps Pneumatic Oil Pumps Downtubes Accessories
How to Buy
Medium Pressure (Oil Pump) Selection Guide
These air operated pumps are used to deliver motor oils, gear oils,
hydraulic oils and automatic transmission fluid (ATF) from origial
refinery drums or tanks. They are ideal for local or remote
installations where oil is piped to multiple hose outlets and/or
reels, metered outlets or portable service stations.
These rugged weatherproof units are available in Standard Duty, RAM,
and Heavy Duty to meet any pumping requirement. Models for use on 16
gallon drums mount to drum covers. 55-gallon drum models are available
with bung adapters, which screw directly into 2" bung holes on drums
and covers. Stub pumps are available for use in standard size and bulk
tanks equipped with 2" bung opening.
The chart below lists general medium-pressure pump selection
guidelihnes. Each application varies and should be carefully
considered for special conditions that may require a pump selection
other than the standard recommendations listed.
These conditions include, but are not limited to:
* Viscosity of product pumped
* Ambient temperature conditions
* Simultaneous operation of several dispensing outlets
* Dispensing volum requirements
When measuring total pump distance, the hose length of dispensing
reels should be included in total distance.
Pump distance (feet) Up to 10 ft. Up to 25 ft. Up to 75 ft. 75-200 ft.
Up to 200 ft. Over 200 ft. Over 300 ft.
Number of outlets 1 1 1-2 1-3 3+ 1-3 3+
16 gallon container N/A 9960-A 9960-A N/A N/A N/A N/A
55 gallon container (all rquire downtubes except 7216-4 and 9969-B)
7216-4*** 9918-A 9918-A*, 9969-B** 9969-B*, 9970** 7783-A4 9970* or
7783-A4** 7793-A1
Bulk container (these pumps require a downtube) 9916-A1 N/A 9918-A*,
9968**, 8568-A4 9968* or 9970** 7783-C4 7783-C4** 7793-C
Tubing recommendation (hydraulic fitting) 5/8" OD 0.035" Wall 5/8" OD
0.035" Wall 5/8" OD 0.035" Wall 5/8" OD 0.035" Wall 1" OD 0.049" Wall
1" OD 0.049" Wall 1" OD 0.049" Wall
* High volume transfer pump
** For pumping light fluids, e.g., ATF or hydraulic oil
*** For pumping heavy fluids, E.G., 10w 40 and gear oils
NOTE: For pumping Washer Fluid or 50/50 mix of Antifreeze and Water,
use 8202 or 7880-C1 regardless of pumping deistance & number of
outlets. For pumping non-petroleum based products, contact Alemite
Tech Service.
WARNING: Do not operate pump at higher pressure than lowest rated part
of system. Sever injury may result if pump is operated at pressures
greater than the lowest rated compononent in the distsribution system.
Keywords: Alemite Lubrication Systems, fluid handling, Parts and service kits.
Products ; Pumps ;Chemical and Material Handling
