Description
Rust-Oleum® Floor Coating Kit, 2-Component Anti-Slip Low Profile, Series: AS6000 System, Liquid, Gray/Silver, Flat, 80 to 100 sq-ft/gal Coverage, Chemical Composition: Part A: Amidoamine/Epoxy Resin Adduct, Glacial Acetic Acid, Aliphatic Polyamine/Part B: Crystalline Silica/Quartz, Epichlorohydrin-Bisphenol A Resin, Carbon Black, Propylene Glycol Monomethyl Ether, Titanium Dioxide, 50 to 100 deg F, 70 g/L VOC, Solvent Like
Features:
- This low VOC, water based coating is specially formulated for wet areas on concrete surfaces
- Safeguards against slips and falls
- Dries quickly can accept heavy traffic in just 48 hrs, easy-to clean, chemical resistant
- Mix parts together with a mechanical mixer, apply using a phenolic core roller
- Water, propylene glycol monomethyl ether solvent
- 0.78 dry, 0.86 wet coefficient of friction
- 3.7:1 mixing ratio
- 2 years shelf life
- >200 deg F flash point
- Part A: activator, part B: base
- Anti-slip low profile water based epoxy
- Safer traction on barefoot-grade floors
- For interior/exterior use in pool areas, locker rooms, showers, laundries
- 1 hr immediately after mixing, pour the activated material on the floor in a long thin stripe pot life
- 10 to 15 mil DFT1 course texture
- 12 hrs foot traffic dry time, 48 hrs heavy traffic dry time
Applications:
For interior/exterior use in pool areas, locker rooms, showers, laundries and for wet areas on concrete, safer traction on barefoot-grade floors
Standards/Approval:
- USDA FSIS Approved
- SARA Title III 1986 Sections 311/312
