Description
O-Z/Gedney Cast Junction Box, Type YS Unflanged, 12 in Height, 12 in Width, 8 in Depth, NEMA 1/2/3/3R/3S/4/5/6/6P/12/12K/13 NEMA Rating, Gasketed Screw-On Cover, Surface Mounting, Cast Iron, Hot Dipped Galvanized
Features:
- Raintight, watertight, dusttight
- Suitable for a variety of applications
- These boxes are listed by Underwriters Laboratories and Canadian Standards Association as type 4
- Cast metal enclosure means 1-piece construction
- No spot welded seams like those found in formed sheet metal boxes
- Greater mechanical strength
- Thicker walls make them more suitable for drilling and tapping at the factory or in the field
- Cast metal enclosures will provide long life, are inherently corrosion-resistant, are able to withstand more mechanical abuse and have the lowest initial cost
- Mounting lugs are provided on all surface mounted boxes
- Boxes up to 12 x 6 in have 2 mounting lugs
- Larger boxes have 4 mounting lugs
- All mounting lugs will be located on the long sides of the box, unless otherwise specified
- Raintight boxes are constructed to withstand a beating rain
- Watertight boxes (NEMA type 4) are constructed to prevent the entry of water under extreme conditions of weather
- Dusttight boxes are constructed to provide a degree of protection against dust and falling dirt
- Boxes have a post in each corner and allowances must be made for them when conduit entrances are to be located close to a corner
- Neoprene gasket located between cover and box
- Wide selection of sizes and locations for drilled and tapped and slip hole conduit entrances
Applications:
For indoor/outdoor or where subject to rain, dripping or splashing water or hose directed water
Standards/Approval:
- CEC Class II, Division 1, 2, Class III
- UL 50
- UL 514A
- UL 50E
- UL File No. E24824
- CSA C22.2 No. 18.1
- CSA C22.2 No. 94.1
- CSA C22.2 No. 94.2
- CSA C22.2 No. 25
- CSA 020945
