Description
O-Z/Gedney Cable Support Body, Type K, 3 in Size, For Use With: Threaded Rigid/IMC/EMT Conduit and Aluminum/Copper Clad Aluminum/Copper/Non-Armored Cable, Specifications: Locking Style, Tapered, Multiple Segment Plug, 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 kcmil Conductor, Ductile/Malleable Iron, Hot Dipped Galvanized, 4-1/2 in Dia x 3-3/4 in H Dimensions
Features:
- Threaded for rigid conduit and IMC
- Use with all types of insulations at all voltages
- The design of this support is similar to the type R except that is it is equipped with a locking collar which securely holds the pOZi-grip™ wedging plug in place
- This permits the support to be installed in any position and provides holding force against pull in either direction
- Body only can be ordered separately, for installation prior to wire pulling
- Plug only can be ordered later, once wires are in place
- If mounting on a non-metallic/non-grounded conduit, a Lay-In-Lug™ grounding lug should be mounted on cable support body
- For threadless rigid conduit, threadless IMC or EMT, the body can be attached to the male threads of a setscrew or compression connector
- For PVC conduit, use a PVC terminal adapter
- Can be installed in horizontal or inverted position
- Due to the possibility of magnetic induction heating, a single alternating current conductor should not be used in iron fittings
Applications:
For supporting non-armored electrical cables in conduit, indoor and ordinary location applications
Standards/Approval:
- Buy American Act Compliant
- UL 514B
- ANSI Specified
- UL File No. E11853
- NEC 300-19
