Description
O-Z/Gedney Cable Support, Type CMT, 5 in Size, For Use With: Threaded Rigid/IMC/EMT Conduit and Aluminum/Copper Clad Aluminum/Copper/Non-Armored Cable, Specifications: Compound, Ventilating, Tapered, Multiple Segment Plug, 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 kcmil Conductor, Ductile/Malleable Iron, Hot Dipped Galvanized, 7-1/8 in Dia x 5-5/8 in H Dimensions
Features:
- Threaded for rigid conduit and IMC
- Use with all types of insulations at all voltages
- This device not only supports the cable, but furnishes a weatherproof seal and provides ventilation at the top of the conduit riser
- The temperature in a conduit riser can be reduced 8 to 11 deg C (15 to 20 deg F) with proper venting
- To obtain full effect of this decrease, the lower end of the conduit must be open or vented by use of the conduit ventilators
- Body only can be ordered separately, for installation prior to wire pulling
- Plug only can be ordered later, once wires are in place
- If mounting on a non-metallic/non-grounded conduit, a Lay-In-Lug™ grounding lug should be mounted on cable support body
- For threadless rigid conduit, threadless IMC or EMT, the body can be attached to the male threads of a setscrew or compression connector
- For PVC conduit, use a PVC terminal adapter
- Due to the possibility of magnetic induction heating, a single alternating current conductor should not be used in iron fittings
- For one or more wires
Applications:
For supporting non-armored electrical cables in vertical conduit risers, furnish a weatherproof seal and provide ventilation at the top of the conduit, outdoor and ordinary location applications
Standards/Approval:
- ARRA Compliant
- Buy American Act Compliant
- UL 514B
- ANSI Specified
- NEC 300-19
