Description
O-Z/Gedney UNILETS™ Explosionproof Conduit Sealing Fitting, Dust-Ignitionproof Raintight, Series: EY Series, 3/4 in, For Use With: IMC/Threaded Rigid Metal Conduit, Surface Mount, Malleable Iron, Silver, Tri-Coated, 4.71 in L x 1.38 in W
Features:
- Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Close radius type for sealing vertical or horizontal conduit runs
- Restrict any explosion to the sealed off enclosure
- Required in class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in class I, Division 1 and 2 locations where two or more enclosures are connected by 36 or less conduit, seal must be located within 18 in of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, Division 2 locations
- 1.19 in turning radius
- Female threaded x male threaded connection
- 25% fill vertical and horizontal conduit sealing fittings for close turning radius
- Triple coat of zinc electroplate, chromate and epoxy powder coated finish
Standards/Approval:
- Class I, Div 1, 2, Groups C, D
- Class I, Zone 1, 2, Groups IIA, IIB
- Class II, Div 1, 2, Groups E, F, G
- Class III
- Mil-F-28675
- UL 886 File No. E34997
- CSA 009795
- CSA C22.2 No. 30
- NEC 500/503/505
- ARRA Compliant
