Description
O-Z/Gedney Conduit Sealing Fitting, 2-1/2 in, For Use With: IMC/Threaded Rigid Metal Conduit, Malleable Iron, Tri-Coated, 7.5 in L x 3.38 in W
Features:
- Explosionproof, dust-ignition proof, raintight
- Smooth, rounded integral bushings in hubs protect conductor insulation
- Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Prevent passage of gases, vapors or flames from one portion of conduit system to another
- Required in class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in class I, Division 1 and 2 locations where two or more enclosures are connected by 36 or less conduit, seal must be located within 18 in of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, Division 2 locations
- EYDM drain sealing fittings close radius type for sealing vertical conduit runs, access cover has drain valve for automatic draining of water accumulation above the seal
- EYDM vertical conduit drain seals for close turning radius (25% fill)
- Removable male nipple
- 2.69 in turning radius
- 1020.6 g Kwiko® cement required
- Restrict any explosion to the sealed off enclosure, prevent pressure piling within conduit system
- Triple coat of zinc electroplate, chromate and epoxy powder coated finish
Applications:
Hazardous Location Applications
Standards/Approval:
- Class I, Div 1, 2, Groups A, B, C, D Class II, Div 1, 2, Groups E, F, G Class III
- UL 886 File No. E10444
- CSA C22.2 No. 30 File No. 065181
- CEC Approved
- NEC Compliant
