Description

NSI Photocontrol, Series: 2000, 120 VAC, 50/60 Hz, 2000 W Tungsten, 1800 VA Ballast, SPST, 2 min, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio, Environmental Conditions: -40 to 140 deg F Operating Temperature, Screw/Stem Mount, Lexan

Features:

• Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants
• Photocell responds to the light spectrum near to that of a human eye
• Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning and more
• Works with screw base CFL and LED lamp
• On and Off time delay
• Cadmium sulphide, epoxy conformal coated 1/2 in diameter cell
• Remain closed between dusk and dawn (the unit fails in the on position) contacts
• Three color coded, minimum 6 in wire leads, 16 AWG, rated for 105 deg C lead wires
• On fail mode
• Epoxy conformal coated

Applications:

Flood Lamp, Patio Lamp, Decorative Lighting, Parking Lot Lighting, Building Lighting and Outdoor Signs

Standards/Approval:

• cULus Listed
• ANSI Specified
• UL 773A

Warranty:

5 Years

Ballast Load	1800 VA
Contact Form	SPST
Environmental Conditions	-40 to 140 deg F Operating Temperature
Frequency Rating	50/60 Hz
Material	Lexan
Mounting Type	Screw/Stem
Sensitivity	1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio
Sensor Type	Cadmium Sulfide Cell
Series	2000
Timing Range	2 min
Tungsten Rating	2000 W
Voltage Rating	120 VAC
Wire Size	16 AWG
Manufacturer	NSI INDUSTRIES INC