Description
NIBCO® Gate Valve, Series: S-113-D, 1/2 in Nominal, Solder, 200 psi, 125 lb, Media: Air/Gas/Water, Handwheel Actuator, 3.63 in Top to Inlet Center, Bronze Body, Silicon Bronze Trim, Aramid Fiber, Domestic
Features:
- 125 psi/8.6 bar saturated steam to 353 deg /178 deg
- 200 psi/13.8 bar non-shock cold working pressure
- Class 125 solder end connections
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- Dezincification resistant
- The NIBCO bronze gate valve features a screw-in bonnet for service where infrequent maintenance is required
- The solder ends allow for ease of installation
- Non-rising stem gate valves are used when shutoff is required and a space saving is necessary
- The solid wedge, integral seats and bi-directional service make the gate valve a good choice for a broad range of services
Applications:
For commercial and industrial applications including hot and cold water, HVAC, steam, compressed air, gas and other general utility services
Standards/Approval:
- MSS SP-80
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
