Description
NIBCO® Ball Valve, 2-Piece, Series: S-580-70-LL, 1-1/4 in Nominal, Solder, 600 psi, 400 deg F, Standard Port, Media: Air/Gas/Water, 1 in Orifice, Standard Lever Handle Actuator, Polished Chrome Brass Ball, 4 in Inlet to Outlet Length, 2.63 in Top to Inlet Center, Cast Red Bronze Body, Silicon Bronze Trim, PTFE, 6-3/4 in L Dimensions, Domestic
Features:
- Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
- Maximum temperature rating 400 deg
- Conventional port
- Stainless steel ball and stem
- Vented ball
- Blowout-proof stem
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- The NIBCO bronze ball valve with solder end connections provides bubble-tight shutoff at 600 PSI
- The valve's reinforced PTFE seat ring and brass hard chrome plated ball exhibit high chemical resistance properties, and is recommended for many high pressure applications
- The valve may be used for isolation and throttling (half open to full open only)
Standards/Approval:
- ASTM B584 Alloy C84400 Body
- ASTM B371 Alloy C69430 or ASTM B99 Alloy C65100 Stem
- ASTM B124 Alloy C37700 or ASTM B16 Alloy C36000 Ball
- MSS SP-110
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
