Description
NIBCO® Ball Valve, 2-Piece 1/4 Turn, Series: PCSU-FP-600A-LF, 1 in Nominal, Press x Solder Union, 250 psi, 250 deg F, Full Port, Media: Water, 0.98 in Orifice, Standard Lever Handle Actuator, Polished Chrome Brass Ball, 4-1/2 in Inlet to Outlet Length, 2.21 in Top to Inlet Center, Forged DZR Copper Alloy Body, Brass/PTFE Trim, EPDM/PTFE, 6.9 in L Dimensions, Import
Features:
- Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
- Maximum service temperature 250 deg
- Blowout-proof stem
- Reinforced PTFE seat rings
- Multiple handle options
- Not intended for gas use
- This valve features a single union MIP end by Press-to-connect end connections
- The press-to-connect end is engineered with an inboard bead and a leak detection EPDM O-ring press end for quick and easy copper to copper joinery
- Properly applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux
Applications:
For drinking water, domestic hot and cold water, HVAC (condensers, chilled water, hot water heating), isolation and throttling (half-open to full-open only), connect to rigid copper tubing manufactured per ASTM B88, condition H (hard drawn)
Standards/Approval:
- Alloy C46500 Body/Ball
- ASME B16.51
- ASTM D2000 O-Ring
- cUPC Listed
- IAPMO/ANSI Z1157 (IGC-157)
- Low Lead Compliant NSF/ANSI 61/372
- MSS SP-145
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
2 years Limited
