Description

NIBCO® Press System® In-line Ball and Check Valve, 2-Piece, Series: PC-FP-485-LF, 3/4 in Nominal, Press x Female Press, 250 psi, 250 deg F, Full Port, Media: Hot and Cold Water, 0.883 in Orifice, Standard Lever Handle Actuator, Polished Chrome Brass Ball, 4.2 in Inlet to Outlet Length, 2.11 in Top to Inlet Center, Forged DZR Brass Body, Brass/PTFE Trim, EPDM/PTFE, 6.58 in L x 2.89 in W x 1.57 in H Dimensions, Import

Features:

• Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
• Copper-to-copper connections
• Blowout-proof stem
• Reinforced PTFE seat rings
• Press leak-detection feature
• Dezincification resistant
• Not intended for gas use
• Multiple handle options

Applications:

For drinking water, domestic hot and cold water, HVAC (condensers, chilled water, hot water heating), isolation and throttling (half-open to full-open only) and to connect to rigid copper tubing manufactured per ASTM B88, condition H (hard drawn)

Standards/Approval:

• cUPC Listed
• IAPMO/ANSI Z1157
• IGC 157
• Low Lead Compliant
• MSS SP-145
• NSF/ANSI 61/372
• PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Warranty:

2 years

Actuator Type	Standard Lever Handle
Ball Material	Polished Chrome Brass
Body Material	Forged DZR Brass
Dimensions	6.58 in L x 2.89 in W x 1.57 in H
Domestic/Import	Import
End Style	Female Press
Inlet to Outlet Length	4.2 in
Media	Hot and Cold Water
Nominal Size	3/4 in
Orifice Size	0.883 in
Port Type	Full
Pressure Rating	250 psi CWP
Series	PC-FP-485-LF
Softgoods Material	EPDM/PTFE
Temperature Rating	250 deg F
Top to Inlet Center	2.11 in
Trim Material	Brass/PTFE
Manufacturer	NIBCO INC