Description
NIBCO® Ball Valve, 2-Piece 1/4 Turn, Series: PC-585-70-LX, 3/4 in Nominal, Press x Female Press, 250 psi, 250 deg F, Full Port, Media: Water, 3/4 in Orifice, NIB-SEAL® Locking Extended Insulated Handle Actuator, Brass Ball, 5.05 in Inlet to Outlet Length, 2.28 in Top to Inlet Center, DZR Bronze Body, Silicon Bronze Trim, EPDM/PTFE, 7.29 in L Dimensions, Domestic
Features:
- Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
- Maximum service temperature 250 deg
- Reinforced PTFE seat rings
- Press leak-detection feature
- Multiple handle options, including NIB-Seal
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- The NIBCO Press System bronze ball valve body is manufactured from dezincification resistant bronze, with a bronze blowout-proof stem
- With the full port design and brass ball, the ball valve allows maximum flow and minimum pressure drop or turbulence with unobstructed bi-directional flow
- The ball valve is designed with press-to-connect end connections with an inboard bead and EPDM O-ring for quick and easy joinery to the piping system
- Properly applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux
- This ball valve features a new design that allows a leak to occur during testing if the press connection is not properly crimped
Applications:
For HVAC, Hot and Cold Potable Water and Non-Potable Process Water Applications
Standards/Approval:
- ASTM B16 Alloy C36000/ASTM B283 Alloy C37700 Ball
- ASTM B371 Alloy C69300/ASTM B99 Alloy C65100 Stem
- ASTM B584 Alloy C84400 Body
- MSS SP-110
- Low Lead Compliant
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
