Description
NIBCO® Ball Valve, 2-Piece, Series: PC-585-70-66, 2 in Nominal, Press x Female Press, 250 psi, 250 deg F, Full Port, 2 in Orifice, Extended Lever With Memory Stop Actuator, Stainless Steel Ball, 8.65 in Inlet to Outlet Length, 3.51 in Top to Inlet Center, Bronze Body, 316 Stainless Steel Trim, EPDM/PTFE, 11.05 in L Dimensions, Domestic
Features:
- Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
- Maximum service temperature 250 deg F
- Blowout-proof stem
- Vented ball
- Reinforced PTFE seat rings
- Press leak-detection feature
- Multiple handle options, including NIB-Seal
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- This ball valve has press connections and features a new design that allows a leak to occur during testing if the press connection is not properly crimped
- The two-piece ball valve body is manufactured from dezincification resistant bronze, with a stainless steel blowout-proof stem
Applications:
Mechanical HVAC and Non-Potable Process Water Applications
Standards/Approval:
- ASTM B584 Alloy C84400 Body
- ASTM A276 Type 316 Stem
- ASTM A276 Type 316 or ASTM A351 Type CF8M Ball
- MSS SP-110
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
