Description
NIBCO® HydraPure® Press System® Performance Bronze® Ball Valve, 3-Piece 1/4-Turn, Series: PC-595R-66-LF, 1-1/4 in Nominal, Press x Female Press, 250 psi, 250 deg F, Full Port, Media: Water, 1.382 in Orifice, Standard Lever Handle Actuator, 316 Stainless Steel Ball, 3.092 in Top to Inlet Center, Silicon Bronze Body, RPTFE/316 Stainless Steel Trim, FKM/PTFE, 2.718 in W Dimensions, Domestic
Features:
- Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
- Maximum service temperature 250 deg F
- Repairable Design
- Blowout-proof stem
- Reinforced PTFE seat rings
- Press leak-detection feature
- Multiple handle options, including NIB-Seal
- The ball valve is designed with press-to-connect copper end connections with an inboard bead and EPDM O-ring for quick and easy copper to copper joinery
- Properly applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux
Standards/Approval:
- Alloy C87850/A276 Type S31600
- ASTM B584
- IAPMO/ANSI Z1157
- Low Lead Compliant
- MSS SP-110/SP-145
- NSF/ANSI 372
- NSF/ANSI 61-8 Commercial Hot 180 deg F (Annex F and G)
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
