Description
NIBCO® Angle Valve, Series: PF-311-Y, 1-1/2 in Nominal, Press x Female Press, 200 psi, 250 deg F, Handwheel Actuator, 7-1/4 in Top to Inlet Center, Bronze Body, Silicon Bronze Trim, PTFE/Graphite, Domestic
Features:
- Valve pressure rating 200 psi/13.8 bar non shock cold working pressure
- Maximum service temperature 250 deg
- Screw-in bonnet
- Integral seal
- Renewable seat and disc
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- The NIBCO Press System bronze angle valve is used for throttling or regulating flow and the design eliminates a low area in the system where particles can settle and corrode or solidify
- The angle valve features press-to-connect end connections with an inboard bead and EPDM O-rings for quick and easy joinery to the piping system
- Simply applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux
Standards/Approval:
- ASTM B62 Alloy C83600 Body
- ASTM B371 Alloy C69430 Stem
- MSS SP-80
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
