NIBCO® Ball Valve, 3-Piece, 2 in, 600 psi, 316 Stainless Steel

Description

NIBCO® Ball Valve, 3-Piece, Series: G-590-Y-66, 2 in Nominal, IPS Grooved, 600 psi, 400 deg F, Standard Port, Media: Air/Gas/Water, 1-1/2 in Orifice, Standard Locking Lever Handle Actuator, 316 Stainless Steel Ball, 5.87 in Inlet to Outlet Length, 2.97 in Top to Inlet Center, Bronze Body, 316 Stainless Steel Trim, PTFE/Fluorocarbon Rubber, Domestic

Features:

• Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
• Maximum temperature rating 400 deg
• Conventional port
• Blowout-proof stem
• Dezincification resistant
• The PTFE seat ring and stainless steel stem and ball exhibits high chemical resistance properties and is recommended for many high pressure applications
• It may be used for isolation and throttling (half open to full open only)
• The three-piece valve is repairable in-line
• The valve features IPS grooved end connections for easy installation

Applications:

Hot/Cold Water, Numerous Gas Applications, Compressed Air, Vacuum Service, Condenser and Chilled Water

Standards/Approval:

• MSS SP-110
• PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Warranty:

5 years Limited

Actuator Type	Standard Locking Lever Handle
Ball Material	316 Stainless Steel
Body Material	Bronze
Domestic/Import	Domestic
End Style	Grooved
Inlet to Outlet Length	5.87 in
Media	Air/Gas/Water
Nominal Size	2 in
Orifice Size	1-1/2 in
Port Type	Standard
Pressure Rating	600 psi
Series	G-590-Y-66
Softgoods Material	PTFE/Fluorocarbon Rubber
Temperature Rating	400 deg F
Top to Inlet Center	2.97 in
Trim Material	316 Stainless Steel Stem
Type	3-Piece
Manufacturer	NIBCO®