Description
MORRIS Piercing Connector, Above Ground Insulated, 250 to 750 kcmil Main, 250 to 500 kcmil Tap Conductor, 5/8 in Bolt, 600 VAC, 330 in-lb Torque, 2-Port, 194 deg F, Fiber Reinforced Thermoplastic, 5.7 in L x 3.6 in W x 5.6 in H
Features:
- Connector installs in just minutes saving many man hours on the job
- Eliminates wire stripping, connecting and taping of split bolts and adding inhibitor
- Above ground connector can be installed on energized circuits eliminating power shutdowns
- Overhead services both insulated and bare mains, above grade URD services, street lighting, non-tension splicing and tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps
- Double shear head bolt guarantees correct torque tightening every time, ensuring a quality connection and eliminating the possibility of hot spots, damaged wires or loose connections
- No cable stripping required, simply insert the jacketed cable into the entry port and tighten with a 1/2 in 6-point socket
- The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear head, the installer has no contact at any point with an energized part
- Can be installed on energized conductors, however, the tap must not be under load
- Corrosion-free connection is good for hot, cold, damp and salty connections
- Properly installed the connector seals water-tight, this is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water
- Copper teeth are tin plated, shell is high strength UV-resistant thermoplastic insulating material, steel bolts are galvanized
Standards/Approval:
- ANSI C119.4
- UL 486B
- PROP65:WARNING: CALIFORNIA RESIDENTS ONLY Certain chemicals contained within products may cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov
