Product Data

KSCdirect Part #: MILL 70885
Description: 1/2" x 1429" BLUE MONSTER THREAD SEAL TAPE
MFG Part #: 70885
UPC: 038091708857
On Hand: In Stock - Available for immediate shipment.

Your Price: $3.76 / EA

For shipping rates, add item to cart.
* Quantity discounts may be available. Call Kelly Supply at 800-918-8939.
Alternatively, you may e-mail info@kscdirect.com for service.


Mill-Rose 70885 - 1/2" x 1429" BLUE MONSTER THREAD SEAL TAPE

Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. Thats 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze.

Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.


• Composition: 99.6% PTFE < 0.4%
• Pigment Color: Blue
• Length: 1429"
• Thickness: 0.0035" +/- 10%
• Density: 0.8g/cm3
• Elongation: >100%
• Tensile Strength: 15N / mm2

Can be used on Pipes carrying the following:

• Acids, concentrated (see precautions) and Acids, dilute
• Alcohols, Gasohol
• Aliphatic solvents, Aromatic solvents, Chlorinated solvents
• Ammonia, liquid
• Caustics, concentrated (see precautions)
• Compressed air, Steam, Water
• Cutting oils
• Diesel fuel oil
• Ethylene glycol, Glycerine
• Fatty acids
• Heating oils, Kerosene
• Hydraulic fluids, Hydraulic oils
• Hydrogen, gaseous and liquid, Inert gases, gaseous and liquid
• Jet fuel
• Ketones, Petroleum solvents
• Liquid Petroleum Gas, Natural gas
• Mineral oils, Vegetable oils
• Nitrogen, gaseous and liquid
• Soap, liquid


• 1.Use " (12mm) wide tape
• 2. Clean the male and female threads thoroughly
• 3.Wrap the tape around the male thread. Take care to keep the tape under tension as you are wrapping so the tape molds itself into the root of the thread.
• 4.Make sure that you wrap with the thread.
• 5.Make sure that the tape does not overlap the end of the fitting.
• 6.Three wraps seal most threads
• Note: For poor quality or damaged threads, or threads that are hard to seal like parallel threads, or threads on fittings subject to vibration, more than three wraps may be necessary.



Supplemental Files