Description
Cleanfit Thread Sealing Tape, 3-Wrap Waterline, 260 in Length, 1/2 in Width, 0.004 in Thickness, 1.5 g/cu-cm, -450 to 500 deg F, 4347 psi, PTFE, Yellow
Features:
- Just 3 wraps for leak-proof joints
- 99% PTFE less than 1% pigment composition
- Greater than 100% elongation
- In tests conducted by an independent laboratory Mill-Rose 3-wrap red waterline seal tape was found to seal fittings carrying water at pressures up to 4347 psi or 30000kPa when applied as per instructions
- -450 to 500 deg F (-268 to 260 deg C) PTFE is completely stable up to 500 deg F or 260 deg C
- Decomposition is slow up to 750 deg F or 400 deg C
- Although decomposition will occur on contact with naked flames
- 10 to 17 N/mm-sq tensile strength
- Use on pipe made from galvanized steel iron, brass, copper, aluminum, stainless steel polyethylene, polypropylene, PVC, CPVC, ABS and fiberglass
- Do not use gas thread seal tape on oxygen systems
Applications:
Ideally Suited For Natural Gas, Propane and Butane Lines
Standards/Approval:
- ANSI LC7-2009
- Australian Gas Association AGA 3226
- Certified to comply with the provisions of A-A58092(ASG)
- cSAus Certified
- UL Listed 31RO