Description
Merrill™ Heated Yard Hydrant, Lead Free Standard, Series: Any Temp® H-3000, 3/4 in Nominal, 4 ft Bury Depth, 54 in Overall Length, 60 psi, Nylon Fiber Reinforced Head, Domestic
Features:
- Simply turn clockwise to lock hydrant open or closed and set screw lock provided so hydrant can not be adjusted without a hex wrench, prevent vandalism or accidental shut off of water
- Outlet of hydrant 3/4 in pipe thread molded into Zytel Super Tough by DuPont, one of the world's toughest thermoplastic, standard pipe size for connection and will not corrode
- Water flow thru plunger and 1/2 in galvanized pipe or 3/4 in rigid copper, provides high flow rate needed without increasing cost
- Plunger has (4) ethylene propylene quad ring seals which never come out of adjustment, have longer life than O-rings and withstand higher pressures, longest operating life ring seals
- Heavy molded Delrin® has been used in valves for over forty years and is molded to close tolerance, will not corrode or rust out
- Extra heavy steel collar at ground level to protect hydrant from normal abuse when mowing grass or shoveling snow, hydrant will stand up to years of abuse
- Swivel parts permit withdrawal of all moving parts without digging up hydrant, very simple repair and taken apart with one tool
- Energy efficient heating cable: A high technology self-regulating cable that provides only the amount of heat needed for the varying outdoor temperature and does not waste electricity like the heat rod used by another company
- Longest life and very low cost of operation
- Heating cable built into hydrant can not be stolen like heat rod used by another company, and no electrical hazard since heating cable is not immersed in water flow thru hydrant
- Longest service life and no electrical hazard
- If unit is shut off and unplugged - winterize kit needed
- 1/2 in galvanized riser pipe
Applications:
Municipal Water Systems
Warranty:
1 Year Limited
