Description
Leviton® Decora® Occupancy Sensor, 1-Pole Dual Relay Self Adjusting, 120/230/277 VAC, 210/410 mW, Multi-Technology/PIR/Ultrasonic Sensor, 2400 sq-ft Coverage, 180 deg Viewing, 30 s to 30 min Delay, Fluorescent Lamp, 50/60 Hz Response, Wall Mount, 0 to 40 deg C, Red, 46 in H x 1.75 in W x 1.83 in D
Features:
- Provides automatic lighting control for two separate banks of fluorescent, incandescent or low voltage lighting from a single unit
- The second relay is a manual ON only with a maximum 30 min time out for maximum energy savings to comply with CEC title 24
- Fits in a standard 1-gang wallbox and replaces (2) 1-pole wall switches for fast and easy installation, neutral and ground connection required for OSSMD-MD, OSSMD-GD does not require a neutral for installation
- Low profile design eliminates obtrusive scanning device look, elegant Decora® wallplates complement any interior for sleek aesthetics uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field of view provides approximately 2100 sq-ft of coverage
- Convenient dual pushbuttons provide manual ON/OFF light switching of each load at any time
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive minor motion area where even slight body movements will be detected
- Vandal resistant PIR lens
- Adjustable horizontal field-of-view (PIR may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens), no masking required
- Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings
- To comply with CEC title 24, LED indicator light flashes when sensor detects motion to verify detection is active, green flashes for ultrasonic, red flashes for PIR
- Time delay adjustment for delayed OFF time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximize energy savings
- Light sensor measures the ambient light in the room when it first detects motion and leaves the lights OFF (hold OFF) if there is enough light in the room or turns the lights connected to the first relay ON if there is not enough light in the room
- Self-adaptive technology eliminates callbacks for adjustments
- Exclusive Walk-through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
- Non-adaptive mode disables self-adjusting delayed OFF time and Walk-through feature in applications where these features are not desired
- Vacancy confirmation when the time out expires and the relays turns OFF, a 30 sec vacancy confirmation exists to turn the relays back ON
- False detection circuitry
- Ultrasonic technology provides excellent minor motion sensitivity
- Ability to disable both PIR and ultrasonic
Applications:
Commercial Applications
Standards/Approval:
- ETL/cETL Listed
- CSA Certified
- FCC Certified
- NOM Certified
- CEC Title 24 Compliant
- NAFTA CF434
Warranty:
5 Years Limited
