Description
Leviton® Decora® Occupancy Sensor, 1-Pole, 120/230/277 VAC, 100/250 mW Power, Passive Infrared Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 30 min Time Delay, Fluorescent Lamp, 50/60 Hz Response, Wall Mounting, 0 to 50 deg C, Gray, 1.75 in W x 1.85 in D x 46 in H Dimensions
Features:
- Fits in standard wallbox and replaces 1-pole wall switch
- Low profile design eliminates obtrusive scanning device look, elegant Decora® wallplates complement any interior for sleek aesthetics uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field of view provides approximately 2100 sq-ft of coverage
- Convenient dual pushbuttons provide manual ON/Off light switching of each load at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive minor motion area where even slight body movements will be detected
- Vandal-resistant PIR lens
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual On/auto Off mode for installations where manual On switching is required but auto Off switching is still desired for CEC title T24 energy savings
- To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay adjustment for delayed Off time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximum energy savings
- Light sensor adjustable ambient light override ranges from approximately 2 ft candles (20 LUX) to 500+ ft candles (5000+ LUX) to prevent lights from turning On automatically during periods of ample natural light, increasing energy savings
- Vacancy confirmation when the time out expires and the lights turns Off, a 30 sec vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights Off and keep them Off while the room is occupied
- 1-unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts
- Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- No neutral design is optional for retrofit applications
Applications:
Small Offices, Conference Rooms, Classrooms, Lounges and Commercial Applications
Standards/Approval:
- UL Listed
- CSA Certified
- CEC Title 24 Compliant
- FCC Certified
- NOM Compliant
- NAFTA CF434
Warranty:
5 Years Limited