Description
Leviton® Decora® Occupancy Sensor, 1-Pole Dual Relay Self Adjusting, 110/270 mW, PIR Sensor, 2100 ft Coverage, 180 deg Viewing, 30 s to 30 min Delay, Fluorescent Lamp, 50/60 Hz Response, Wall Mount, 0 to 50 deg C, Ivory, 46 in H x 1.75 in W x 1.83 in D
Features:
- Provides automatic switching for two separate banks of fluorescent, incandescent or low voltage lighting from a single unit
- Convenient dual pushbuttons provide manual ON/OFF light switching of each load at any time
- ODSOD-ID conference room mode- primary and secondary relays switch lighting to last ON/OFF status when personnel enter room, providing a consistent lighting level from one occupancy period to the next
- Both relays respond to ambient light override, preventing lights from turning ON automatically during periods of ample natural light, for increased energy savings
- ODS0D-ID classroom mode- both primary and secondary relays always switch lighting ON when personnel enter room, regardless of their ON/OFF status during last period of occupancy
- Secondary relay only responds to ambient light override primary does not, ensuring that students and personnel never enter a darkened room
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied
- Auto-adapting delayed OFF time interval compensates for real time occupancy patterns, preventing unnecessary ON/OFF switching
- Exclusive Walk-through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
- Non-adaptive mode disables self-adjusting delayed OFF time and Walk-through feature in applications where these features are not desired
- Daylight harvesting light sensor measures the ambient light in the room when it first detects motion, it leaves the lights OFF if there is enough light in the room or turns the lights connected to the first relay ON if there is not enough light in the room
- Low profile design eliminates obtrusive scanning device look, elegant Decora® wallplates complement any interior for sleek aesthetics uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field of view provides approximately 2100 sq-ft of coverage
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive minor motion area where even slight body movements will be detected
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Time delay adjustment for delayed OFF time settings of 30 sec (for walking test), 5, 10 and 30 min, allows customized adjustments to maximize energy savings
- Vandal resistant PIR lens
- False detection circuitry
- Light sensor adjustable ambient light override ranges from approximately 2 foot candles (20 LUX) to 500+ foot candles (5000+ LUX)
- Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings
Applications:
Commercial Applications
Standards/Approval:
- cULus Listed
- CEC Title 24 Compliant
- FCC Approved
- NAFTA CF434
Warranty:
5 Years Limited