Description
LEESON® Washguard® Gear Motor, Right Angle Continuous Duty, 90 VDC, 2.2 A Full Load Amperage, 0.13 hp, 42 rpm Maximum, 0.63 in Shaft Dia, 1.8 in Shaft Length, Reversible, 80 in-lb, 60:1 Gear Ratio, Worm Gear, Ball Bearing, 235 lb Overhung Load, Special Mount, 40 deg C, Class F Insulation, Totally Enclosed Nonvented (TENV), Aluminum Housing, White Epoxy Painted, 10.86 in L x 6.56 in H
Features:
- Frame, end shields, armature and interior components protected by enamel and polyester compounds for resistance to moisture, acids, alkalis and oil
- Cast conduit box with threaded conduit holes and nitrile gaskets keep water out
- Conduit box cover is made from 304 stainless steel
- For any condensation that may accumulate inside the motor, one way stainless steel vapor vent is provided
- Thru-bolt heads and nuts sealed with fiber washers
- Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation
- All exterior components are 300-series stainless steel, All sealing components are Viton for superior chemical resistance
- End shields are O-ring sealed to the frame, Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
- Double-sealed bearings are pre-lubricated with moisture-resistant high temperature grease for long life
- Interior coatings applied to rotor and stator protect against corrosion,
- Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter
- Single-phase motors use Solid State Sinpac switch - no mechanical switch contacts to corrode and fail
- Operational at 115/208-230 V at 60HZ
- Nameplate image may vary from actual product
- Machined fits between the end bells and motor frame are sealed with gaskets, Thru-bolt heads and nuts sealed with fiber washers
- O-rings under each threaded brush cover, Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation
- Precision PMAChined aluminum gear housing, Lubrication is permanent with an oil bath, Gearbox has all ball bearings
- Output shaft is field interchangeable from left hand to right hand style by reassembly, Double output shaft available as a factory option
Standards/Approval:
- CSA Certified
- CE Certified
- UL Listed
Warranty:
1 Year
