Description
LEESON® Washguard® AC Motor, 4-Pole Continuous Duty, Capacitor Start Motors, Washdown Duty Motors Special Features, 0.33 hp, 115/208 to 230 V AC, 5.4/3 to 2.7 A, 60 Hz Frequency, 1 ph, 1725 rpm Speed, 1 Speed, TENV Enclosure, 56HC Frame, 0.63 in Dia x 1.88 in L Shaft, Selective CCW Rotation, 1.15 Service Factor, Ball Bearing, 16 ft-lb Torque, C-Face/Rigid Base Mounting, 40 deg C, Insulation Class: Class F, Rolled Steel, 10:1 Variable Torque Speed, 12.2 in L x 6.5 in W x 6.79 in H Dimensions
Features:
- Full fact nameplate is laser etched on the motor frame
- Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter
- Exterior fastener use minimized reducing the number of entry points for moisture
- Double sealed bearings are pre-lubricated with moisture resistant high temperature grease for long life
- Interior coatings applied to rotor and stator protect against corrosion and ease to clean construction
- New conduit box mounting system provides optimum sealing
- Windings are immersed and cured in polyester insulating varnish for extra moisture resistance
- Exclusive IRIS® inverter duty insulation system provides extra protection and long life and especially in inverter-driven applications
- Single phase motors use solid state Sinpac® switch, no mechanical switch contacts to corrode and fail
- Operational at 115/208-230 V at 60Hz
- All exterior components are 300-series stainless steel, All sealing components are Viton for superior chemical resistance
- End shields are O-ring sealed to the frame, Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
Applications:
Bakery, Commercial and Industrial Applications
Standards/Approval:
- BISSC 769
- CSA LR33543
- UL E57948
Warranty:
1 Year
