Description

LEESON® AC Gear Motor, Continuous Duty Parallel Shaft, Series: PE350, 208/230/460 VAC, 1.2/0.6 A Full Load Amperage, 0.25 hp, 60 Hz, 3 ph, 58 rpm Maximum, 3/4 in Shaft Dia, 3/8 in Shaft Length, Reconnect, 244 in-lb, 30:1 Gear Ratio, PE353-42 Gear, 327 lb Overhung Load, Class F4 Insulation, Totally Enclosed Fan Cooled, Cast Iron/Aluminum/Steel Housing, High Gloss Hardened Black Enamel, 13.07 in L x 5.16 in W x 5.57 in H

Features:

• All exterior components are 300-series stainless steel
• All sealing components are Viton for superior chemical resistance
• Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
• Double-sealed bearings are pre-lubricated with moisture-resistant high temperature grease for long life
• Windings are immersed and cured in polyester insulating varnish for extra moisture-resistance
• New conduit box mounting system provides optimum sealing
• Full fact nameplate is laser etched on the motor frame
• Designed with the exclusive Inverter Rated Insulation System (IRIS)
• Provides superior protection against voltage spikes induced by variable frequency drives
• Needle bearings in the parallel shaft gearboxes

Applications:

For mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail

Standards/Approval:

• CSA Certified
• UL Listed

Dimensions	13.07 in L x 5.16 in W x 5.57 in H
Enclosure Type	Totally Enclosed Fan Cooled
Finish	High Gloss Hardened Black Enamel
Frequency Rating	60 Hz
Full Load Amperage	1.2/0.6 A
Gear Ratio	30:1
Gear Type	PE353-42
Horsepower	0.25 hp
Housing Material	Cast Iron/Aluminum/Steel
Insulation Type	Class F4
Maximum Speed	58 rpm
Overhung Load	327 lb
Phase	3
Rotation Type	Reconnect
Series	PE350
Shaft Diameter	3/4 in
Shaft Length	3/8 in
Manufacturer	LEESON ELECTRIC CORPORATION

This item has no supplemental files.