Description
Lasco®, 416-251, Reducing Street Elbow, Fitting/Connector: 90 deg Elbow, 2 x 1-1/2 in Nominal, Slip x Slip with Spigot End Style, SCH 40/STD Schedule, Injection-Molded Method of Manufacture, PVC, Nitrile Rubber Seal, White, 140 deg F, Domestic
Features:
- ASTM D1784 - Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds, class 23447
- ASTM F1970 - Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Material - Lasco® SCH 40/STD fittings are produced from PVC type 1, cell classification 12454-B O-rings are produced from a Buna- N (nitrile) material
- NSF/ANSI standard 61, Annex G - Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI standard 14 - plastics piping system components and related materials
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
Applications:
Irrigation, Plumbing, Industrial, Pool/Spa and Retail Markets
Standards/Approval:
- ANSI Annex-G
- ASTM D1784/F1970
- NSF/ANSI 14/61
Warranty:
Limited
