Description
Kwikflex® Elbow, Non-Metallic, 1-1/4 in, 90 deg, For Use With: Non-Metallic Liquid Tight Conduit, Nylon 6, Gray, 4.45 in H x 5.2 in W
Features:
- All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents
- No disassembly required
- Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut
- The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into a NPT threaded hole)
- No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths
- Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction
- Complete conduit/connector system is reusable
- Lower installed cost
- Smooth internal surfaces for easier wire installation around corner angles
Applications:
HVAC Equipment, Marine Equipment, Motors, Controls, Printing Equipment, Refrigeration Equipment, Assemblies, Wire Hook-Up, Indoor and Outdoor Applications
Standards/Approval:
- ARRA Compliant
- Buy American Act Compliant
- cULus Listed
- UL 514B
- UL 1660
- CSA C22.2 No. 227.2
- CSA C22.2 No. 18.3
- UL94 V-2 Flammability Rating
Warranty:
Limited
