Description
Koyo Drawn Cup Roller Clutch, Caged Round Bore, Series: RC Inch Series, 5/8 in Bore, 7/8 in OD, 5/8 in Width, CW/CCW Lock Direction, 149 in-lb Torque, Steel Bearing, Polymer Cage, 14000 rpm Oil Maximum, -30 to 110 deg C
Features:
- For proper application, separate bearings are suggested to carry radial loads and assure concentricity between shaft and housing
- The clutch engages and when housing is rotated relatively to the shaft in the direction of arrow marking as labelled on the cup
- Shaft raceway and housing bore diameters that are necessary for proper mounting and operation are listed on the opposite page
- Compact, lightweight and operate directly on a hardened shaft
- Installation is easily accomplished with a simple press fit
- Best used for light duty torque applications that require a one way clutch
- RC are clutches capable for rotational torque only
- "FS" in the suffix for the RC call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard
- A hardened and machined shaft or an "IR" inner ring is required for optimal performance
- A press fit into the housing is required
Applications:
Office Equipment, Paper-Towel Dispensers, Exercise Equipment, Appliances and 2-Speed Gearboxes
Standards/Approval:
