Commercial Building Controls : Valves and Valve Actuators : Globe Valves : V5013B,C,D : V5013B1011/U
3 in 3-way flanged Globe valve
Overview
V5013B is a mixing three-way valve. V5013C is a diverting three-way valve. These valves provide proportional or two-position control of hot/chilled water in closed loop heating/cooling systems - offered in sizes 2 1/2 in. through 6 in.
Features
- Not suitable for combustible gases.
- Valves utilize direct mounting valve actuators, Q5020/Q5022 linkages with Direct Coupled Actuators, or Pneumatic Valve Actuators to operate the valve.
- Constant total flow through full plug travel.
- Stainless steel stem prevents corrosion.
- Class IV (0.01% of Cv) Leakage Rating.
Product Specifications
- Dimensions (in.)
- 11 7/8 in. high x 7 1/2 in. wide x 11 in. deep
- Dimensions (mm)
- 301 mm high x 190 mm wide x 279 mm deep
- Maximum Safe Operating Pressure (psi)
- 150 psi at 240 F water
- Maximum Safe Operating Pressure (kPa)
- 1034 kPa at 115 C water
- Used With
- ML6984/ML7984; Q5001/Modutrol IV Motor; ML6420,21A,25; ML7420/ML7421A/ML7425
- Comments
- Mixing
- Ambient Temperature Range (F)
- 40 F to 250 F
- Ambient Temperature Range (C)
- 4 C to 121 C
- Connection Type
- Flanged
- Body Pattern
- Three-way
- Pipe Size (inch)
- 3 in.
- Pipe Size (DN)
- DN80
- Bonnet Size (in.)
- 1-3/8 in.
- Maximum Differential Pressure Ratings (Close-off) (psi)
- For Quiet Water Service--20 psid
- Maximum Differential Pressure Ratings (Close-off) (kPa)
- For Quiet Water Service--138 kPa
- Capacity (Cv)
- 100 Cv
- Capacity (Kv)
- 85 kvs
- Valve Action
- Stem up increases B to AB flow
- Valve Type
- Globe Valve
- Controlled Fluid
- Chilled or hot water with up to 50% Glycol. Not for use with steam or fuels.
- Materials (Body)
- Cast Iron
- Materials (Seat)
- Bronze
- Materials (Stem)
- Stainless Steel
- Flow Characteristic
- Linear (constant total)
- Actuation
- Must be purchased separately
- Static Pressure Rating (psi)
- Meets ANSI 125 Standard
- Static Pressure Rating (kPa)
- Meets ANSI 125 Standard
- ANSI/ASME Rating
- 125
- Stem Travel (in.)
- 3/4 in.
- Stem Travel (mm)
- 20 mm
- Bonnet Size (mm)
- 35 mm
- Materials (Packing)
- Teflon Cone
